CYBLE-022001-00 EZ-BLE PRoC Module General Description The Cypress CYBLE-022001-00 is a fully certified and qualified Functional Capabilities module supporting Bluetooth Low Energy (BLE) wireless Up to 15 capacitive sensors for buttons or sliders with communication. The CYBLE-022001-00 is a turnkey solution best-in-class signal-to-noise ration (SNR) and liquid tolerance and includes onboard crystal oscillators, chip antenna, passive components, and Cypress PRoC BLE. 12-bit, 1-Msps SAR ADC with internal reference, sample-and-hold (S/H), and channel sequencer The CYBLE-022001-00 supports a number of peripheral functions (ADC, timers, counters, PWM) and serial 2 Two serial communication blocks (SCBs) supporting I C 2 communication protocols (I C, UART, SPI) through its (master/slave), SPI (master/slave), or UART programmable architecture. The CYBLE-022001-00 includes a royalty-free BLE stack compatible with Bluetooth 4.1 and Four dedicated 16-bit timer, counter, or PWM blocks provides up to 16 GPIOs in a small 10 10 1.80 mm package. (TCPWMs) The CYBLE-022001-00 is a complete solution and an ideal fit for Programmable low voltage detect (LVD) from 1.8 V to 4.5 V applications requiring BLE wireless connectivity. 2 I S master interface Module Description Bluetooth Low Energy protocol stack supporting generic Module size: 10.0 mm 10.0 mm 1.80 mm (with shield) access profile (GAP) Central, Peripheral, Observer, or Broadcaster roles Bluetooth 4.1 single-mode module Switches between Central and Peripheral roles on-the-go Industrial temperature range: 40 C to +85 C Standard Bluetooth Low Energy profiles and services for 32-bit processor (0.9 DMIPS/MHz) with single-cycle 32-bit interoperability multiply, operating at up to 48 MHz Custom profile and service for specific use cases 128-KB flash memory Benefits 16-KB SRAM memory Watchdog timer with dedicated internal low-speed oscillator The CYBLE-022001-00 module is provided as a turnkey (ILO) solution, including all necessary hardware required to use BLE communication standards. Two-pin SWD for programming Proven, qualified, and certified hardware design ready to use Up to 16 GPIOs configurable as open drain high/low, pull-up/pull-down, HI-Z analog, HI-Z digital, or strong output Small footprint (10 10 mm 1.80 mm), perfect for space constrained applications Certified to FCC, CE MIC, KC, and IC regulations Reprogrammable architecture FCC ID: WAP2001 IC ID: 7922A-2001 Fully certified module eliminates the time needed for design, MIC ID: 005-101007 development and certification processes KC ID: MSIP-CRM-Cyp-2001 Bluetooth SIG qualified with QDID and Declaration ID Bluetooth SIG 4.1 qualified Flexible communication protocol support QDID: 67366 Declaration ID: D026297 PSoC Creator provides an easy-to-use integrated design environment (IDE) to configure, develop, program, and test a Power Consumption BLE application TX output power: 18 dbm to +3 dbm Received signal strength indicator (RSSI) with 1-dB resolution TX current consumption of 15.6 mA (radio only, 0 dbm) RX current consumption of 16.4 mA (radio only) Low power mode support Deep Sleep: 1.3 A with watch crystal oscillator (WCO) on Hibernate: 150 nA with SRAM retention Stop: 60 nA with XRES wakeup Cypress Semiconductor Corporation 198 Champion Court San Jose, CA 95134-1709 408-943-2600 Document Number: 001-95662 Rev. *C Revised June 26, 2015CYBLE-022001-00 Contents Overview ............................................................................3 Regulatory Information .................................................. 21 Module Description ......................................................3 FCC ...........................................................................21 Pad Connection Interface ................................................5 Industry Canada (IC) Certification ............................. 22 Recommended Host PCB Layout ...................................6 European R&TTE Declaration of Conformity ............ 22 Power Supply Connections and Recommended MIC Japan ................................................................. 23 External Components ......................................................9 KC Korea ................................................................... 23 Connection Options .....................................................9 Ordering Information ...................................................... 24 External Component Recommendation ......................9 Ordering Code Definitions ......................................... 24 Critical Components List ...........................................11 Packaging ........................................................................ 25 Antenna Design .........................................................11 Document Conventions ................................................. 27 Electrical Specification ..................................................12 Units of Measure ....................................................... 27 GPIO .........................................................................14 Document History Page ................................................. 28 XRES ........................................................................15 Sales, Solutions, and Legal Information ...................... 29 Serial Communication ...............................................16 Worldwide Sales and Design Support ....................... 29 Memory .....................................................................17 Products ....................................................................29 System Resources ....................................................17 PSoC Solutions ...................................................... 29 Environmental Specifications .......................................20 Cypress Developer Community ................................. 29 Environmental Compliance .......................................20 Technical Support ..................................................... 29 RF Certification ..........................................................20 Environmental Conditions .........................................20 ESD and EMI Protection ...........................................20 Document Number: 001-95662 Rev. *C Page 2 of 29