CY3280-CPM1

3. Program the RTC lab hex file to the CY3280-22x45 board. Refer to the quick start guide of CY3280-22x45 UCC board for detailed program procedure. 4. Unplug the MiniProg from the CY3280-22x45 board. 5. Disconnect JP3 and JP4 of CY3280-CPM1 board. 6. Power the CY3280-22x45 board. 5. Test the Board The elapsed time is displayed on the LED panel in real time. You can also test the board with the other code examples available on the CD. 6. Design Support and Resources A wealth of information about PSoC Designer and CapSense are available on www.cypress.com. For knowledge base articles, customer forums, and online application support, visit www.cypress.com/support. CY3280-CPM1 CapSense Plus Module Development Kit Quick Start Guide Doc. 001-51974 Rev. *A 2009-2011 Cypress Semiconductor Corporation. PSoC and CapSense are registered trademarks of Cypress Cypress Semiconductor Semiconductor Corp. All other trademarks or registered trademarks referenced herein are property of the respective corporations. 198 Champion Court San Jose, CA 95134-1709 If you have questions, call Cypress Customer Support Phone (USA): 800.858.1810 +1 (800) 541-4736 Ext. 8 (in the USA), Phone (Intnl): 408.943.2600 +1 (408) 943-2600 Ext. 8 (International), Cypress Semiconductor Corporation The module board consists of an LED panel, a potentiometer, an LED bar, six LEDs, a 1. Kit Contents thermistor, and two buttons. These are interfaced to the CapSense Controller board Each CY3280-CPM1 CapSense Plus Module Development Kit contains: via a 40-pin receptacle connector (J2). The board also consists of two loop-back CY3280-CPM1 CapSense Plus Module Board connection jumpers (JP3 and JP4) to demonstrate the variable length SPI master- CY3280-CPM1 Kit CD slave communication. Quick Start Guide 3. Getting Started Universal CapSense Module boards are available for purchase separately. For more information, visit