Flat Cable EMI Suppression Cores (2643178651) Part Number: 2643178651 43 FULL FLAT CABLE CORE Explanation of Part Numbers: Digits 1 & 2 = Product Class Digits 3 & 4 = Material Grade Flat cable suppression core can accommodate multi- conductors flat cables, in widths from 12.7 mm (0.500) up to 77 mm (3.0). These flat cable cores are available in two ferrite material grades to reduce conducted EMI from 1 MHz to hundreds of MHz. Our Expanded Cable & Suppressor Kit (part number 0199000005) contains a selection of these flat cable cores and clips. Flat Cable Cores are available in selected sizes in the Flex Circuit & Ribbon Cable Core Kit (part number 0199000038). Assembly clips are available for most of the split flat cable cores. See section Flat Cable Cores Assembly clips. Catalog Drawing 3D Model Weight: 4.1 (g) Dim mm mm tol nominal inch inch misc. Cable Information A 26.5 0.40 1.043 Max Max Solid Flat Cable Diameter Dimension Equivalent Cores B 21.5 0.40 0.846 0 C 6 0.30 0.236 21.10 x 1.35 - 0 D 6.6 0.25 0.26 E 1.6 0.25 0.063 Chart Legend + Test frequency For assembly clips see Flat Cable Cores Assembly Clips Typical Impedance () 10 MHz 10 + 25 MHz 17 + 100 MHz 34 250 MHz 54 Flat cable suppression cores, split or single cores, are controlled for impedances only. Minimum impedance values are specified for the + marked frequencies. The minimum impedance is listed on our catalog drawing. Catalog DrawingCatalog Drawing Centered, single turn impedance tests for the 31 and 43 material parts are performed on the E4990A Impedance Analyzer. All tests are made with the shortest practical wire length. CSV Download Fair- Rite Products Corp. One Commercial Row, Wallkill, New York 12589-0288 888-324-7748 845-895-2055 Fax: 845-895-2629 emailprotected www.fair- rite.com