Chip Arrays (2512061027Y0A4) Part Number: 2512061027Y0A4 MULTI- LAYER TAPE & REEL Fair- Rite offers an effective cost and real estate reduction by our line of chip arrays. Four chip beads, packaged in a 1206 (3216) size, for suppression of conducted EMI where size is at a premium. Chip arrays have plated contacts, 100% matte tin over a nickel undercoating. The arrays can accommodate both reflow and wave soldering technologies. Recommended storage and operating temperature range is -55 C to 125 C. Chip Bead Kit (part number 0199000018) contains the 600 ohm 4 line chip array. Packaging Options: - Chip arrays are supplied taped and reeled. Suggested land patterns are in accordance to the IPC-7351. Weight: 0.03 (g) Package Size: 1206 (3216) Dim mm mm tol nominal inch inch misc. Reel Information A 0.8 0.20 0.032 Tape Width Pitch Parts 7 Parts 13 Parts 14 mm mm Reel Reel Reel B 1.6 0.20 0.063 8 4 3000 - - C 3.2 0.20 0.126 D 0.3 0.20 0.011 E 0.8 0.10 0.032 F 0.04 0.15 0.018 Land Patterns V W X Y Z 0.70 1.30 0.50 0.60 0.80 (0.028) (0.051) (0.020) (0.024) (0.032)Chart Legend + Test frequency Typical Impedance () 50 MHz 770 + 100 MHz 1000 25% 500 MHz 400 1000 MHz 200 Electrical Properties Max DCR 0.7 () Max Current 50 (mA) Chip arrays are controlled for impedance. The impedance values listed are typical values. The nominal impedance with a +/- 25% tolerance is specified for the + marked 100 MHz frequency. Chip arrays are measured for impedance on the HP 4291A and fixture HP 16192A. The maximum voltage between adjacent beads is 5V. Chip arrays are 100% tested for impedance and dc resistance.