1.6mm round Subminiature Infrared LED IR26-21C/L110/TR8 Features High reliability Small double-end package Peak wavelengthp=850nm Package in 8mm tape on 7diameter reel Low forward voltage Pb free The product itself will remain within RoHS compliant version. Compliance with EU REACH Compliance Halogen Free.(Br<900 ppm,Cl<900 ppm,Br+Cl<1500 ppm) Descriptions IR26-21C/L110/TR8 is an infrared emitting diode in miniature SMD Package which is molded in a water clear plastic with right angle lens The device is Spectrally matched with silicon LEDs and LEDs Applications PCB mounted infrared sensor Infrared emitting for miniature light barrier Floppy disk drive Optoelectronic switch Smoke detector Device Selection Guide Part Category Chip Material Lens Color IR GaAlAs Water Clear 1 www.everlight.com Copyright 2016, Everlight All Rights Reserved. Release Date: 2017/4/21. Issue No: DIR-0000975 Rev:4 Ver.:4 Release Date:05/18/2017 :Approved() Data Sheet 1.6mm round Subminiature Infrared LED IR26-21C/L110/TR8 Package Dimensions Notes: 1.All dimensions are in millimeters Notes: 2.Tolerances unless dimensions 0.1mm 3.Below is stencil design suggestion (Reference): Solder paste : Sn/Ag3.0/Cu0.5 Stencil thickness : 0.10mm Stencil design drawing : 4.Suggested pad dimension is just for reference only Please modify the pad dimension based on individual need 2 www.everlight.com Copyright 2016, Everlight All Rights Reserved. Release Date: 2017/4/21. Issue No:DIR-0000975 Rev:4 Ver.:4 Release Date:05/18/2017 :Approved()