02/11/2015 www.crouzet.com 42 mm 10 and 17 Watts 17 W Part number 82800037 Usable power: 9 to 16 W For low-speed drive applications Sintered bronze bearings lubricated for life Power supply by 4.75 mm tags Interchangeable brushes Optional one-channel encoder Part numbers Type Type Voltage References 82800037 17 W 828000 24 V Without encoder Specifications No-load characteristics Speed of rotation (rpm) 2750 Absorbed power (W) 4,3 Absorbed current (A) 0,18 Nominal characteristics Speed (rpm) 2000 Torque (mNm) 75 Usable power (W) 15,6 Absorbed power (W) 26,4 Absorbed current (A) 1,1 Gearbox case temperature rise (C) 40 Efficiency (%) 59 General characteristics Insulation class (conforming to IEC 85) F (155C) Protection (IEC/EN 60529) IP20 Max. output power (W) 17 Start torque (mNm) 210 Starting current (A) 2,7 Resistance () 7,7 Inductance (mH) 6,9 Torque constant (Nm/A) 0,0724 Electrical time constant (ms) 0,89 Mechanical time constant (ms) 16 Thermal time constant (mn) 12 2 110 Inertia (g.cm ) Weight (g) 400 Number of of segments 8 Service life (h) 3000 Sintered bronze bearings Replaceable brushes Encoder characteristics Output current (mA) < 25 (25C) Supply (V) 4,530DC Ambient temperature (C) -4085C Made to order products, available on request Special interference suppression Other supply voltages Motor with 1 ball bearing at front (essential for vertical motor) Shaft lengths at front and/or rear 5 pulses/revolution magnetic encoder Reversible magnetic encoder (1 or 5 pulses/revolution) Other fixing flanges on front Dimensions (mm) 828000 - 828100 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected02/11/2015 www.crouzet.com o N Legend 2 x M3 at 180, depth 5 mm over 32 0.05 2 holes 2.75 at 120 depth 5 mm 32 2 tags IEC 760, series 4.8 x 0.5 L: 828000: 84.8 mm max. L: 828100: 69.8 mm max. Dimensions (mm) Dimensions with magnetic encoder o N Legend L1: 828000: 99.1 mm max. L1: 828100: 84.1 mm max. Curves 828000 Unless otherwise specified, the characteristics given are applicable to all or part of the product range selected