59300

Instruction Sheet T-HEAD* Crimping Tools 59170, 59250, 59275, 59300, 408-1610 69692-1 and 69693-1 27 APR 11 Rev M PROPER USE GUIDELINES Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available. PIDG insulation restricting terminals with TEFLONt coating, used on stranded copper wire sizes 26 through 14. Insulation Adjustment Locking Screw PIDG Radiation Resistant Terminals and Splices on stranded copper wire sizes 26 through 14. PLASTI-GRIP* Terminals on solid or stranded copper wire sizes 22 through 14. Insulation Adjustment PLASTI-GRIP Butt Splices on solid or stranded Indicator copper wire sizes 26 through 22. Spare Wire Caps on solid or stranded copper wire sizes 22 through 14. Locator Dimensions on this sheet are in millimeters with NOTE inch equivalent dimensions in brackets . Figures and illustrations are for identification only and are i not drawn to scale. Quick Take-Up Trigger Reasons for reissue of this sheet are provided in Color Code Section 9, REVISION SUMMARY. Information 2. DESCRIPTION The handles of the crimping tools are color-coded to match the color coding of the product to be applied. Yellow The insulation adjustment indicator is used to control Handle crimp height of the insulation barrel. It can be set at any of four positions corresponding to insulation diameter. Tools also feature a locator, quick take-up trigger, and color code information. The CERTI-CRIMP hand crimping tool ratchet control ensures full crimping of the product. Once engaged, CERTI-CRIMP* Hand Crimping Tool Ratchet Control the ratchet will not release until the handles have been FULLY closed. Figure 1 The crimping dies bottom before the ratchet CAUTION releases. This is a design feature that ensures 1. INTRODUCTION maximum electrical and tensile performance of the crimp. Do NOT re-adjust the ratchet. This instruction sheet covers the use of-HEAD Crimping Tools 59170, 59250, 59275, 59300, 3. COLOR AND DOT CODING 69692-1, and 69693-1. See Figure 1. These tools crimp: Note that tool handles and terminal, splice and cap insulation are color coded for a given wire range as PIDG* vinyl and nylon terminals and splices on listed in Figure 2. Crimp the color coded terminal, stranded copper wire sizes 26 through 14. splice or cap in the matching color coded portion of the STRATO-THERM* terminals on stranded copper tool. For example, when using Hand Tool 59275, wire sizes 26 through 14. yellow coded PIDG terminals and splices and red coded pre-insulated seated splices must be crimped in PIDG Insulation Restricting Nylon Terminals on that portion of tool displaying the red and yellow coded stranded copper wire sizes 26 through 14. dots and yellow handle. See Figure 1. 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company TOOLING ASSISTANCE CENTER 1-800-722-1111 This controlled document is subject to change. 1 of 11 All Rights Reserved PRODUCT INFORMATION 1-800-522-6752 For latest revision and Regional Customer Service, *Trademark visit our website at www.te.com LOC B TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product and/or Company names may be trademarks of their respective owners. 408-1610 Figure 2 (Contd) Rev M 2 of 11