120341

Slide 1000 Series Miniature Slide Switches Features/Benefits Typical Applications Variety of actuators and terminations Test & measurement equipment Panel mount tabs available Telecommunications Epoxy terminal sealcompatible with Computer & peripherals bottom-wash cleaning RoHS compliant Models Available Specifications Materials CONTACT RATING: B contact material: 0.4 VA max. @ CASE: diallyl phthalate (DAP), (UL 94V-0). I 20 V AC or DC max. Q contact material: 6 AMPS @ ACTUATOR: Nylon, black, standard. 120 V AC or 28 V DC, 3 AMPS @ 250 V AC. HOUSING: Stainless steel. See page I-16 for additional ratings. SWITCH SUPPORT: Brass or steel, matte-tin plated. ELECTRICAL LIFE: 100,000 make-and-break cycles at full END CONTACTS: B contact material: Copper alloy, with gold plate over load on models with B, K or P contact material; 40,000 cycles nickel plate. Q contact material: Coin silver, silver plated. See on models with G, Q, L, M, S or R contact material. page I-16 for additional contact materials. CONTACT RESISTANCE: Below 10 m typ. initial @ CENTER CONTACT & ALL TERMINALS: B contact material: Copper 2-4 V DC, 100 mA, for both silver and gold plated contacts. alloy, with gold plate over nickel plate. Q contact material: Copper 9 INSULATION RESISTANCE: 10 min. alloy, silver plated. See page I-16 for additional contact materials. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical OPERATING TEMPERATURE: 30C to 65C Data chapter SOLDERABILITY: Per MIL-STD-202F method 208D, or NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant. EIA RS-186E method 9 (1 hour steam aging). NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages I12 through I16. For additional options not shown in catalog, consult Customer Service Center. All models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 1101 SP On-None-On 1103 SP On-Off-On 1108 SP Mom-None-On 1201 DP On-None-On 1203 DP On-Off-On Mounting Style M2 PC mount without tabs M1 Panel mount with tabs Actuator S3 .200 high S1 .040 high Terminations S2 .140 high A Right angle, PC thru-hole Contact Material C PC Thru-hole S4 .285 high B Gold S5 .370 high AV2 Vertical right angle, PC thru-hole Q Silver Z Solder lug S6 .485 high G Gold over silver Seal T3 .200 high V3 V-bracket P Gold, matte-tin E Epoxy V4 V-bracket S Silver, matte-tin D No epoxy seal W .750 long, wire wrap R Gold over silver, matte-tin I Epoxy potted base Z3 Quick connect Actuator Color 2 Black 1 White 3 Red Dimensions are shown: Inches (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I111000 Series Miniature Slide Switches SWITCH FUNCTION SWITCH FUNCTION CONNECTED TERMINALS POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 NO. MODEL POLES NO. SCHEMATIC 1101 ON NONE ON N/A SP 1-2 2-3 1103 ON OFF ON OPEN 1108 MOM. NONE ON N/A SPDT SPDT 0.95 (2,41) I Part number shown: 1101M2S3CQE2 1201 ON NONE ON DP 2-1,5-4 OPEN 2-3,5-6 DPDT 1203 ON OFF ON DPDT Actuator shown in position 1 Terminal Nos. Part number shown: 1201M2S3CQE2 For Reference Only MOM. = Momentary All models with all options when ordered with G, Q, S or R contact material. MOUNTING STYLE M2PC MOUNTING WITHOUT TABS M1PANEL MOUNTING WITH TABS NOTE: Available with C, W, Z, Z3 terminations only. NOTE: Available with A, AV2, C, V3, V4, W terminations only. No mounting hardware supplied. PANEL MOUNTING .275 (6,99) All actuators except T3. For T3 actuator only. Single pole Double pole Dimensions are shown: Inch (mm) Specifications and dimensions subject to change 19 dec 18 www.ckswitches.com I12 Slide