HDSP-521A/523A 14.22 mm (0.56 inch) Dual Digit General Purpose Seven Segment Display Data Sheet Description Features The 14.22 mm (0.56 inch) LED dual digit seven segment Industry standard size displays use industry standard size package and pinout. Industry standard pinout The device is available in either common anode or 14.22 mm (0.56 inch) common cathode. These gray face displays are suitable DIP lead on 2.54 mm for indoor use. AlGaAs Red color Excellent appearance Evenly lighted segments gray package gives optimum Devices contrast 50 ft. viewing angle AlGaAs Red Description Design flexibility HDSP-521A Common Anode Right Hand Decimal Common anode right hand decimal point or common cathode right hand decimal point HDSP-523A Common Cathode Right Hand Decimal Applications Suitable for indoor use Not recommended for industrial application, i.e., operating temperature requirements exceeding +85C 1 or below -35C Extreme temperature cycling not recommended Note: 1. For additional details, please contact your local Avago sales office or an authorized distributor. Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx 1 Mechanical Options 00: No Mechanical Option 1,2 Color Bin Options 0: No Color Bin Limitation 1,2 Maximum Intensity Bin 0: No Maximum Intensity Bin Limitation 1,2 Minimum Intensity Bin 0: No Minimum Intensity Bin Limitation 1 Device Configuration/Color A: AlGaAs Red 1 Device Specific Configuration Refer to Respective Datasheet 1 Package Refer to Respective Datasheet Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Avago representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. 2