PTF01-152A-104B2

Features Long life carbon element Assortment of resistance tapers 45 mm, 60 mm and 100 mm travel lengths Single and dual gang elements Long operational life Tracking error within 2 dB PTF Series Long Life Slide Potentiometer Product Dimensions Electrical Characteristics Standard Resistance Range 45 mm Length of Travel ....................... 1K ohms to 1 megohm Lever End Style A Standard Resistance Tolerance ... 20 % 73.0 0.5 End Resistance ...................1 ohm max. MM (2.874 0.020) DIMENSIONS: (INCHES) Insulation Resistance 500 VDC 65.0 0.2 (2.559 0.008) .............................100 megohms min. 57.0 Dielectric Withstanding Voltage (2.244) M3 2 PLCS...........................................1000 VAC 2.8 Tracking Error ............................... 2 dB (0.110) Standard Taper ..................Linear, Audio 20.0 0.5 Power Rating - Linear 1 (0.787 0.020) 45 mm .............................0.25 watt 60 & 100 mm .....................0.5 watt Power Rating - Audio 45.0 0.5 45 mm ...........................0.125 watt (1.772 0.020) 4.0 +0/-0.1 TRAVEL 60 & 100 mm ...................0.25 watt (0.157 +0/-0.004) 10.0 0.1 Slider Noise .........................60 mV max. 1.2 0.05 6.0 0.2 (0.394 0.004) (0.047 0.002) (0.236 0.008) Environmental Characteristics Operational Life ..............100,000 cycles L 0.5 TR Shift .................................... 15 % (L 0.020) 11.0 0.5 MOUNTING Operating Temperature Range (0.433 0.020) SURFACE .................................-10 C to +55 C 14.0 0.8 Resistance to Solder Heat ............. 5 % (0.551 0.031) Mechanical Characteristics 0.5 2.8 0.2 Mechanical Travel 3.5 0.2 (0.020) (0.110 0.008) (0.138 0.008) .................... See Product Dimensions 1.5 0.1 Operating Force .............................50 gf (0.059 0.004) Stop Strength .........................5 kgf min. Shaft Axial Force ..................10 kgf min. Shaft Wobble .. 2(2 x L/25) mm p-p max. 2 1 3 Soldering Condition Manual ...........300 C 5 C for 3 sec. 2 1 3 Wave ..............260 C 5 C for 5 sec. Wash .....................Not recommended Mounting Hole Detail DIA. 6 PLCS. 2.0 +0.2/-0 65.0 0.1 (0.079 + 0.008/-0) (2.559 0.004) 55.0 0.1 1.6 0.1 (2.165 0.004) (0.063 0.004) 2 1 3 2 1 3 9.0 0.1 7.4 0.1 (0.354 0.004) (0.291 0.004) Schematics Dual Gang Single Gang 2 2 WARNING R1 1 3 R1 1 3 Cancer and Reproductive Harm R2 1 3 www.P65Warnings.ca.gov *RoHS Directive 2015/863, Mar 31, 2015 and Annex. 2 Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic disclaimers as set forth on the last page of this document, and at www.bourns.com/legal/disclaimer.pdf. *RoHS COMPLIANTApplications Mixing consoles Drum machines Keyboards and synthesizers Equalizers PTF Series Long Life Slide Potentiometer Product Dimensions 60 mm Length of Travel Lever End Style A 88.0 0.5 (3.465 0.020) 80.0 0.2 (3.150 0.008) M3 x 0.5 75.0 ( M3x 0.020) (2.953) 2 PLCS. 2.8 (0.110) 20.0 0.5 (0.787 0.020) 60.0 1.0 (2.362 0.039) 4.0 +0/-0.1 TRAVEL (0.157 +0/-0.004) L 0.5 (L 0.020) 11.0 0.5 (0.433 0.020) 14.0 0.8 (0.551 0.031) 2.8 0.2 0.5 3.5 0.2 (0.020) (0.110 0.008) (0.138 0.008) 1.5 0.1 (0.059 0.004) 1 3 MM 2 DIMENSIONS: (INCHES) 1 3 2 Mounting Hole Detail DIA. 6 PLCS. 2.0 +0.2/-0 80.0 0.1 (0.079 + 0.008/-0) 3.0 (3.150 0.004) (0.118) 70.0 0.1 6.0 0.1 (2.756 0.004) (0.236 0.004) 3 1 2 3 1 9.0 0.1 2 (0.354 0.004) 1.9 9.0 0.1 (0.075) (0.354 0.004) 7.1 0.1 (0.280 0.004) Specications are subject to change without notice. Users should verify actual device performance in their specic applications. The products described herein and this document are subject to specic legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.