BMI085 Shuttle Board Bosch
Bosch Sensortec BMI085 Shuttle Board GENERAL DESCRIPTION The Bosch Sensortec BMI085 shuttle board is a PCB with the BMI085 Inertial Measurement Unit (IMU) mounted on it. It allows easy access to the sensors pins via a simple socket. As all Bosch Sensortec sensor shuttle boards have identical footprint, they can be plugged into Bosch Sensortecs advanced development tools (e.g. the Development Board or Application Board). Note: Product photo may differ from real products appearance. Pin 1 Shuttle board outline dimensions (all dimensions in mm) Bosch Sensortec BMI085 2 3 BMI085 shuttle board schematic NOTES The COD GND and COD PULL pins are pins connected to VDD or GND and are used to identify the shuttle board on the Application board if used together with the DevelopmentDesktop2.0 evaluation software (SID = shuttle board ID). DELIVERABLES BMI085 shuttle board Headquarters Bosch Sensortec GmbH Gerhard-Kindler-Strasse 9 72770 Reutlingen Germany Telephone +49 7121 3535 900 Fax +49 7121 3535 909 www.bosch-sensortec.com Data & Specification are preliminary and subject to change without notice Bosch Sensortec GmbH reserves all Doc.-Number: BST-DHW-FL024-01 / Version 1.0 201712 rights in the event of industrial property rights. We reserve all rights of disposal such as copying and passing on to third parties. BOSCH and the symbols are registered trademarks of Robert Bosch GmbH, Germany.