4-Pin Super Flux Yellow LED Lamp Orca R Series (Flat Face) R50YLW-F-0160 RoHS Compliant Low Profile Dome Lens Automatic Insertion Compatible Tubular Packaging Automatic Placement Compatible High Intensity Output High Power Efficiency Bivar R50YLW-F-0160 comes with low profile package design incorporating higher forward current to max- imize intensity while minimizing the number of LEDs required to achieve uniform and enhanced light distri- bution. Low power consumption with quick response time means savings in electricity. Bivar R50YLW-F-0160 can be coupled with reflectors or lenses for optimal light distribution needs. Typical applications are automotive exterior lighting, decorative interior or exterior lighting, specialty stage lighting, and electronic signage. Part Number Material Emitted Color Intensity Typ. mcd Lens Color Viewing Angle R50YLW-F-0160 AlGaInP/GaAs Yellow 600 Water Clear 160 Outline Drawings Notes: ATTENTION CAUTION: LOOKING DIRECTLY AT 1. All dimensions are in inches millimeters . Moisture OBSERVE PRECAUTIONS 2. Standard tolerance: 0.010 unless otherwise noted. Sensitivity LED WITHOUT SHIELDED EYES FOR HANDLING 3. Tolerance of overall epoxy outline: 0.020 unless otherwise noted. ELECTROSTATIC Levels 1 SENSITIVE DEVICES RoHS Compliant MAY CAUSE DAMAGE TO RETINA. 4. Epoxy meniscus may extend to 0.060 max. Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision C 09/11 Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar bivar.com Web: www.bivar.com Page 1 of 4 4-Pin Super Flux Yellow LED Lamp R50YLW-F-0160 Absolute Maximum Ratings T = 25C unless otherwise noted A Power Dissipation 140 mW Forward Current ( DC ) 80 mA 1 Peak Forward Current 160 mA Electrostatic Discharge ( Class1 ) 1000 V Reverse Voltage 5 V Operating Temperature Range -25 ~ +80C Storage Temperature Range -30 ~ +80C 2 Lead Soldering Temperature ( 3 mm from the base of the epoxy bulb ) 260C Notes: 1. 10% Duty Cycle, Pulse Width 0.1 msec. 2. Solder time less than 5 seconds at temperature extreme. Electrical Characteristics T = 25C & I = 50 mA unless otherwise noted A F Recommend Reverse Viewing Forward Dominant Luminous Forward Current (A) Angle 1 2 3 Voltage (V) Emitting Wavelength (nm) Intensity (mcd) Current (mA) V =5V 2 (deg) R Color MIN TYP MAX TYP MAX MIN MAX MIN TYP TYP Yellow 2.0 2.4 2.8 50 10 588 594 400 600 160 Notes: 1. Tolerance of Forward Voltage : 0.05V. 2. Tolerance of Dominant Wavelength : 0.1nm. 3. Tolerance of Luminous Intensity : 15%. Directivity Radiation T = 25C unless otherwise noted A Relative Luminous Intensity vs. Radiation Angle Bivar reserves the right to make changes at any time. Bivar, Inc. 4 Thomas, Irvine, California 92618, U.S.A. Revision C 09/11 Phone: (949) 951-8808 Fax: (949) 951-3974 E-mail: bivar bivar.com Web: www.bivar.com Page 2 of 4