The Bel Power Solutions MAP30/40/42 Series of power supplies combines low cost and universal input in a board-only power solution to meet commercial and industrial requirements. Full international safety, EMI and ESD compliance ensure worldwide acceptance. All units bear the CE Mark. Fixed frequency operation simplifies system level operation. The MAP30/40/42 Series is configured to the international standard 3 x 5 inch footprint. Input and output connections are made via popular single-row Molex connectors. Single output models feature wide- range output adjustability to meet a wide variety of standard and user- specific output voltage requirements. Universal Input 85-264 VAC Input Transient & ESD Compliance to EN61000-4-2/-3/-4 Meets EN55022 Conducted and Radiated Limits Greater than 311,000 Hours MTBF Remote Sense (MAP30, MAP42) RoHS Compliant CE Marked to Low Voltage Directive 2 MAP30/40/42 Series PEAK OUTPUT ADJUSTMENT MAX OUTPUT LINE LOAD RIPPLE & INITIAL SETTING 9 MODEL OUTPUT 2 VOLTAGE RANGE CURRENT REGULATION REGULATION NOISE ACCURACY 1 CURRENT 8 MAP30-1005G 5V 4.7V to 5.8V 6A 8A 0.2% 1% 1% 4.9V to 5.1V MAP42-1005 5V 4.7V to 5.8V 8A 11A 0.2% 1% 1% 4.9V to 5.1V 3 3 MAP42-1012G 12V/15V 11V to 18V 3.4/2.7A 4.6/3.7A 0.2% 1% 1% 11.9V to 12.1V 3 3 MAP42-1024G 24V/28V 23V to 29V 1.7/1.4A 2.3/1.9A 0.2% 1% 1% 23.8V to 24.2V PEAK MAXIMUM OUTPUT ADJUSTMENT OUTPUT LINE LOAD RIPPLE & INITIAL SETTING 9 MODEL OUTPUT OUTPUT 2 VOLTAGE RANGE CURRENT REGULATION REGULATION NOISE ACCURACY 4 CURRENT POWER +5V 4.7V to 5.5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5 7 MAP40-3000G +12V Fixed 2A 3.5A 1% 3.5% 1% 11.5V to 12.5V 40 W 6 -12V Fixed 0.3A 0.5A 1% 2% 1% -11.5V to -12.5V 4.75V to +5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5.25V 5 7 MAP40-3100G +12V Fixed 2A 3.5A 1% 3.5% 1% 11.5V to 12.5V 40 W -12V Fixed 0.3A 0.5A 1% 2% 1% -11.4V to -12.6V 4.75V to +5V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5.25V 7 5 MAP40-3101G 40 W +24V Fixed 1A 1.5A 1% 3.5% 1% 23.0V to 25.0V -12V Fixed 0.3A 0.5A 1% 2% 1% -11.5V to -12.5V +5V 4.7V to 5.8V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5 7 MAP40-3105G +12V Fixed 2A 3.5A 1% 3.5% 1% 11.5V to 12.5V 40 W -5V Fixed 0.5A 1A 1% 2% 1% -4.75V to -5.25V +5V 4.7V to 5.8V 5A 6A 0.2% 2% 1% 4.9V to 5.1V 5 7 MAP40-3500G +12V Fixed 1A 3.5A 1% 3.5% 1% 11.5V to 12.5V 40 W -12V Fixed 0.3A 0.5A 1% 2% 1% -11.4V to -12.6V +5V 4.7V to 5.8V 3A 5A 0.2% 2% 1% 4.9V to 5.1V 5 7 MAP40-3003G +15V Fixed 1.5A 3A 1% 3.5% 1% 14.7V to 15.3V 40 W 6 -15V Fixed 0.2A 0.5A 1% 2% 1% -14.3V to -15.7V 1 Peak ratings may be used as maximum output current with 100 Linear Feet per Minute (LFM) forced air cooling. 2 Maximum peak to peak noise expressed as a percentage of output voltage, 20 MHz bandwidth. 3 MAP42-1012G output currents are expressed as 12V/15V operation. MAP42-1024G output currents are expressed as 24V/28V operation. 4 Peak loads for 30 seconds or less are acceptable, (10% duty cycle max.). 5 Quasi regulated output. See Regulation Curves for more information. 6 Requires a minimum load of 0.5A on V1 or 0.3A on V2. 7 Needs 170 LFM forced air cooling for use at 50C ambient. 8 Needs 200 LFM forced air cooling for use at 50C ambient. 9 Non-G models use lead solder exemption and are not recommended for new designs. Xxx Model highlighted in yellow is not recommended for new designs. tech.support psbel.com