The ABC300 Series of open-frame power supplies, with its wide universal 90-264 VAC input range and high power density, is available at 300 W of output power and a variety of single output voltages. The high efficiency and high power density of the ABC family ensures minimal power loss in end-use equipment, thereby facilitating higher reliability, easier thermal management and meets regulatory approvals for environmentally-friendly end products. These power supplies are ideal for telecom, datacom, industrial equipment and other applications. Key Features & Benefits 5 x 3 x 1.5 inch form factor 200 W convection cooled No minimum load required 5 V Standby output 12 V Fan output Inhibit & Power Good signals IEC Protection Class Options: o Class I: Earth pin J4 (no suffix) o Class II: No Earth pin (-2 suffix) IEC / EN / UL 62368-1 Compliant RoHS Compliant CE marked Applications Instrumentation Renewable Energy Lighting Test and Measurement Industrial Applications Robotics Applied Computing Wireless Communication 2 ABC300 Series 1. MODEL SELECTION MAX LOAD OUTPUT MINIMUM RIPPLE & MODEL CONNECTOR POWER 1 VOLTAGE LOAD NOISE CONVECTION 300 LFM ABC300-1T05G Screw Terminal 5 VDC 28.0 A 40.0 A 0.0 A 2% 200 W ABC300-1T12G Screw Terminal 12 VDC 16.67 A 25.0 A 0.0 A 2% 300 W ABC300-1T15G Screw Terminal 15 VDC 13.33 A 20.0 A 0.0 A 2% 300 W ABC300-1T24G Screw Terminal 24 VDC 8.33 A 13.54 A 0.0 A 2% 325 W ABC300-1T30G Screw Terminal 30 VDC 6.67 A 10.83 A 0.0 A 2% 325 W ABC300-1T48G Screw Terminal 48 VDC 4.17 A 6.77 A 0.0 A 2% 325 W 2 Cover-300-XBC Metal cover kit accessory 1 Ripple is peak to peak with 20 MHz bandwidth and 10 F (Electrolytic capacitor) in parallel with a 0.1 F capacitor at rated line voltage and load ranges. 2 When used in Cover Kit, de-rate output power to 70 % under all operating conditions. 2. INPUT SPECIFICATIONS Specifications are for nominal input voltage, 25C unless otherwise stated. PARAMETER DESCRIPTION / CONDITION SPECIFICATION Input Voltage Universal 90 264 VAC / 120 390 VDC Input Frequency 47 to 63 Hz 120 VAC 3.2 A max Input Current 230 VAC 1.65 A max No Load Power 0.8 W 120 VAC 35 A max Inrush Current 230 VAC 65 A max < 150 A 120 VAC Leakage Current 230 VAC < 300 A PFC converter (fixed) 80 kHz typical Switching Frequency Resonant converter (variable) 35 to 250 kHz, 90 kHz typical tech.support psbel.com