ABX00023

MKR WIFI 1010 Want to add a WiFi interface to your devices Get the MKR WIFI 1010. It connects easily to other Arduino products and is congurable using Arduino so ware and you dont need to be a network expert. This is the newest version of the MKR 1000 WIFI, but with an ESP32 module on board made by U-BLOX. STORE.ARDUINO.CC/ARDUINO-MKR-WIFI-1010MKR WIFI 1010 ARDUINO MICROCONTROLLER Microcontroller SAMD21 The MKR WIFI 1010 is a signicant improvement Architecture ARM Cortex-M0+ 32bit on the MKR 1000 WIFI. It s equipped with an Operating Voltage 3.3V ESP32 module made by U-BLOX. This board aims Flash Memory 256 KB to speed up and simplify the prototyping of WiFi SRAM 32 KB based IoT applications thanks to the exibility of Clock Speed 32.768 kHz (RTC), 48 MHz the ESP32 module and its low power DC Current per I/O Pin 3 mA (I/O Pins) consumption. GENERAL The MKR WIFI 1010 includes 32-bit computational power, the usual rich set of I/O interfaces, and Input Voltage 5 V Digital I/O Pins 22 low power Wi-Fi with a Cryptochip for secure Interfaces I2C, I2S, SPI, UART communication using SHA-256 encryption. Plus, PWM Output 12 it o ers ease of use Arduino So ware (IDE) for Analog I/O Pins 7/1 code development and programming. All of these Power Consumption 93 mA, features make this board the preferred choice for 30mA (low power) the emerging IoT ba ery-powered projects in a Weight 15.3 g compact form. Its USB port can be used to Product Code ABX00023 supply power (5V) to the board. It has a Li-Po charging circuit that allows the Arduino MKR WIFI 1010 to run on ba ery power or an external 5 volt source, charging the Li-Po ba ery while running on external power.