Document Type Part No. DATA SHEET SUF005A001 Product Name Revision No Page No Advanced Sensor Dual Solar Sensor 00 1 (3) Dual Solar Sensor Applications Features The dual solar sensor is mounted on the Fast response time dash panel near the front window. It uses Easy to install two photodiode cells to measure the intensity of solar radiation and give Linear response to sun light intensity electric information which is proportional Horizon to horizon visibility to the calorific power and representative for the intensity of that. And then feeds it Narrow signal tolerance back to the automatic temperature control (ATC) unit of the vehicles air conditioning system. The air temperature of the driver side and passenger side are then automatically adjusted up or down, depending upon the amount of light entering both sides into the vehicle Document Type Part No. DATA SHEET SUF005A001 Product Name Revision No Page No Advanced Sensor Dual Solar Sensor 00 2 (3) 1. Solar Sensor Specification Operating Temp. Range : -30C to 100C Storage Temp. Range : -40C to 110C o o o Sensor output current : 0.145mA15% (at = -90 /90 , = 40 ) 2) 2856K Standard A light source, 31.5 (mW/cm or 14,040 (LUX) NOTES. THE LEFT SIDE AND RIGHT SIDE SENSOR EXHIBIT CURRENTS WITH A NOMINAL VALUE OF 0.145mA15%mA AT31.5mW/cm2 or 14040LUX Fig 1. Current output vs. Light level. Fig 2. Relative Sensitivity vs. wavelength Fig 3. Relative Solar Output Fig 4. Application Schematic Example .