PSAS4F3130071TR

SAS/PCIe 4.0 (U.2&U.3) Connectors HIGH SPEED MULTI-PROTOCOL DESIGN WITH FLEXIBILITIES SAS/PCIe 4.0 (U.2&U.3) connectors come with 16GT/s (PCIe lanes) or 24Gb/s (SAS lanes) speeds to meet the demands of next-generation servers. The 68-position, SAS/PCIe receptacle and header enables implementation of high speed Serial Attached SCSI (SAS) hard disk drive (HDD) interface as well as Peripheral Component Express (PCIe )-based devices. The molded guide post allows device plug and receptacle to self- align during mating process. With halogen-free high temperature thermoplastic, these connectors are made to withstand diverse conditions. It also offers a durability of 500 mating cycles. TARGET MARKETS Compatible with SFF8639 specification Capable of meeting 24Gb/s SSDs and HDDs or PCle based devices at 16GT/s Footprint backward compatible to 12G, 6G and 3G SAS connectors FEATURES BENEFITS Receptacles are inter-mateable with unshielded dual port Offers flexibility in component selection SFF8680 (SAS 3.0 or SAS 4.0) connectors SAS/PCIe connectors enable SFF8630, SFF8680 and Implementation of high speed SSDs (Solid State Drives) SFF8432 interfaces and HDDs (Hard Disk Drives) allows compatibility between unshielded dual and multiport interfaces Backward compatible with 12Gb/s, 6Gb/s SAS, SATA and Same interface can be used for cost-effective storage 3Gb/s SFF8482 connectors HDDs as well as higher performance server SSDs Supports up to 4 port 16GT/s PCIe based devices Improves performance and faster file transfers Supports both SAS and SATA drives Addresses the needs of both mission critical and bulk storage applications Staggered contact lengths Provides sequential contact mating for hot plugging Stamped clips act as connector retainers for robust PCB Provide additional mechanical strength after soldering attachment Molded guideposts help mating halves to self-align by Compensates for connector misalignment providing angled lead-ins Amphenol Information Communications and Commercial Products www.amphenol-icc.com SAS/PCIe 4.0 (U.2&U.3) Connectors TECHNICAL INFORMATION MATERIAL ENVIRONMENTAL Contact Base Metal: Copper alloy Humidity: 96 hours at 40C with 90-95% relative humidity. Per EIA 364-31, Method II, Contact Area Plating: Gold over nickel test condition A Solder Tail Plating: Tin over nickel Temperature Life: 85C for 500 hours. Per EIA Retainer Clip Base Metal: Copper alloy 364-17 test condition III, method A Retainer Plating: Tin over nickel Thermal Shock: 10 cycles between -55C to +85C. Per EIA 364-32, test condition I Housing: Halogen-free high temperature thermoplastic (UL94V-0), black Mixed Flow Gas: Expose samples unmated for 7 days and then mated for 7 additional ELECTRICAL PERFORMANCE days the other samples are exposed mated for 14 days. Per EIA 364-65, class II Aexposed Contact Resistance: 30m max. for signal mated for 14 days. Per EIA 364-65, class II A contacts. Per EIA 364-23 Current Rating: 1.5A min. per contact with SPECIFICATIONS temperature rise not exceeding 30C (power pins Amphenol Product Specification: SSAS009 only: P1P15). Per EIA 364-70B Insulation Resistance: 1000M min. per PACKAGING EIA 364-21 Tape and Reel MECHANICAL PERFORMANCE Tray Durability: 500 mating cycles TARGET MARKETS/APPLICATIONS Mating Force: 59N max. Processor and Storage Blade Unmating Force: 6N min. Mezzanine Card HDD HDD Carrier External Storage System Interposer Card Server Storage Server Processor and Storage Blade Disclaimer www.amphenol-icc.com Please note that the above information is subject to change without notice.