APSDPF6E2

Product Data Sheet Amphenol Industrial Amphe-PPM Quick Disconnect Connectors No. 195 The Amphe-PPM is a rapid mate, push/pull connector which provides positive mating in limited space and ease of use. The design features of the Amphe-PPM allow consumers to save cost in space savings and in installa- tion. Amphe-PPM, the high performance signal and power interconnection solution, is ideally suited to many commercial and industrial applications including, but not limited to: Medical Equipment Instrumentation/Test & Measurement Communication Equipment The Amphe-PPM continues Amphenols commitment of providing new products to meet customer and market demands for new emerg- ing technologies and advancing applications. Features and Benefits of Amphe-PPM Connectors Push/pull rapid mate connector system - high performance of 500 + mating cycles Sealed or non-sealed connector versions - NON-SEALED VERSION: Available in 12mm and 16mm shell sizes From 2 up to 12 contacts of 1.0mm to 2.5mm diameter (see back side for insert arrangement charts) Jam nut receptacle and straight plug are available with a rubber boot or standard cable clamp rear accessory Non-reflective nickel or black epoxy finish IP55 rated SEALED VERSION: Available in 10mm, 12mm, 16mm and 18mm shell sizes From 2 up to 14 contacts of 0.8mm to 2.5mm diameter (see back side for insert arrangement charts) Jam nut receptacle and straight plug come with jacketed cable PG sealing gland Non-reflective nickel finish only IP67 rated Three shell styles available: box mount and jam nut receptacles and a straight plug Designed to IEC 61984 Inserts have a UL94V-0 flammability rating Operating temperature: 40 to 100C Solder contacts standard, crimp by special request Non-magnetic product standard Notice: Specifications are subject to change without notice. Contact your nearest Amphenol Corporation Sales Office for the latest specifications. All statements, information and data given herein are believed to be accurate and reliable but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements or suggestions concerning possible use of our products are made without representation or warranty that any such use is free of patent infringement and are not recommendations to infringe any patent. The user should assume that all safety measures are indicated or that other measures may not be required. Specifications are typical and may not apply to all connectors. AMPHENOL is a registered trademark of Amphenol Corporation. 2006 Amphenol Corporation Printed in U.S.A. 4/2006 AmphenolHOW TO ORDER Amphe-PPM Sealed Connectors APS D S A 6 E1 APS Sealing Range: designates Amphe-PPM Diameters in mm Sealed Series Connectors Series E1 E2 Shell Size: C N/A N/A 3 - 6.5 PG7 C ..... designates 10mm shell size D 3 - 6.5 PG7 4 - 8 PG9 D ..... designates 12mm shell size E 4 - 8 PG9 7 - 12 PG13.5 E ...... designates 16mm shell size F 7 - 12 PG13.5 10 - 14 PG16 F ...... designates 18mm shell size Contact Type: P ...... designates pin contacts Shell Style: S ...... designates socket contacts 2 ...... designates square flange receptacle 6 ...... designates straight plug Insert Arrangement Designator 7 ...... designates jam nut receptacle See Insert Arrangement Tables 1, 2, 3, 4 Table 1 Table 2 Shell Size C 10mm Shell Size D 12mm Contact Contact Insert Diameter No. of Insert Diameter No. of Arrangement (mm) Contacts Arrangement (mm) Contacts A1 2 A 1.6 2 B1 3 B1 3 C 0.8 4 C1 4 D 0.8 5 D1 5 E1 6 F1 7 Table 3 Table 4 Shell Size E 16mm Shell Size F 18mm Contact Contact Insert Diameter No. of Insert Diameter No. of Arrangement (mm) Contacts Arrangement (mm) Contacts A 1.5 2 A 2.5 3 B 2.5 2 B 1.5 5 C1 3 C 1.5 (3 contacts), 1 (5 contacts) 8 D 1.5 3 D1 5 E1 4 F 1.5 4 G1 5 H1 7 I1 9 J1 12