3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission Interface latch design for connection stability MDR digital LCD interface as a 20 or 26 contact connector Contacts: 14, 20, 26, 40 and 50 See Regulatory Information Appendix (RIA) for chemical compliance information TS-0755-C Date Modified: November 13, 2007 Sheet 1 of 3 Physical Insulation Material: Glass Reinforced Polyester (PCT) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Plating Underplating: 80 2.0 m Nickel Wiping Area: 20 0.50 m Min. Gold Solder Tail Plating: Gold Flash over Nickel (RIA E1 & C1 apply) Shroud and Latch Hook Material: Steel Plating: Nickel Grounding Flange Screw Lock Material: Copper Alloy Plating: Tin Marking: 3M Logo and Part Number Electrical Current Rating: 1 A 8 Insulation Resistance: > 5 10 at 500 V DC Withstanding Voltage: 500 V for 1 Minute RMS Environmental Temperature Rating: -55C to +105C Process Rating: 260C (profile per J-STD-020C) UL File No.: E68080 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call 3M Mini D Ribbon (MDR) Connectors .050 Surface Mount Right Angle Receptacle - Shielded 102 Series Contact Dimensions Quantity A.008 B.006 C.006 D.006 E.006 14 1.16 29.5 .931 23.64 .500 12.70 .325 8.26 .496 12.6 20 1.32 33.4 1.081 27.45 .650 16.51 .475 12.07 .646 16.4 26 1.50 38.2 1.231 31.26 .800 20.32 .625 15.88 .795 20.2 40 1.85 47.1 1.581 40.15 1.150 29.21 .975 24.77 1.150 29.2 50 2.06 52.4 1.831 46.50 1.400 35.56 1.225 31.12 1.398 35.5 A position below pos. 1 D position above last .368 position .025 0.635 9.35 last position position 2 position 1 .047 2X M2.5 Thread .010 nom. 1.20 0.25 .394 10.00 .187 4.75 .203 .19 5.15 4.8 2X .138 E 3.5 B Position 1 2X M2.5 Thread (see note in ordering info) .248 6.30 .189 4.80 Inch m m Position Tolerance Unless Noted last position C .0 .00 .000 Positioning Boss (2x) inch .1 .01 .005 D im ensions for R eference Only Ordering Information 102XX-1210PE Contact Quantity (See Table) TS-0755-C Note: Use ( M2.5x8 mm ) screws to mount to panel with max. thickness of .079 2.0 . Sheet 2 of 3 3 3M is a trademark of 3M Company. Interconnect Solutions For technical, sales or ordering information call