Data sheet Weidmller Interface GmbH & Co. KG VPU III R 120V/6KV AC/DC Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Similar to illustration Type III surge protection Compact Type III arrester for AC/DC protection acc. to IEC 61643-11:2012 Suitable for protecting terminals Installed in the vicinity of the equipment to be protected Can be used as single-port arrester when nominal current is greater than 16 A General ordering data Version Surge voltage arrester, Low voltage, with remote contact, Single-phase, U (L/N-PE) < 700 V P Order No. 1351630000 Type VPU III R 120V/6KV AC/DC GTIN (EAN) 4050118158519 Qty. 1 pc(s). Creation date September 16, 2022 4:03:33 AM CEST Catalogue status 09.09.2022 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG VPU III R 120V/6KV AC/DC Klingenbergstrae 26 D-32758 Detmold Germany www.weidmueller.com Technical data Dimensions and weights Depth 71.5 mm Depth (inches) 2.815 inch Height 102 mm Height (inches) 4.016 inch Width 18 mm Width (inches) 0.709 inch Net weight 85 g Temperatures Storage temperature -40 C...70 C Operating temperature -40 C...70 C Humidity 5 - 95% rel. humidity Connection data, remote alert Connection type Cross-section for connected wire, solid Screw connection core, max. 1.5 mm Cross-section for connected wire, solid Max. torque core, min. 0.2 mm 0.5 Nm Stripping length 5 mm General data Colour Design Installation housing 1TE, orange Insta IP 20 Optical function display Green LED = OK, Red LED Protection degree = arrester is defective, replace IP20 Rail TS 35 Segment Power distribution UL 94 flammability rating V-0 Version with remote contact Insulation coordination acc. to EN 50178 Pollution severity 2 Surge voltage category II Rated data IEC / EN Combined pulse U Discharge current, max. (8/20 s) OC 6 kV 3 kA Energy coordination (10 m) Type II, Type III Fuse 16 A Leakage current at U Low voltage network 30 A Single-phase n Mains frequency at 250 Vmax 50...60Hz Max. continuous voltage, Uc (AC) 150 V Max. continuous voltage, Uc (DC) 212 V Number of poles 1 PE conductor current I Protection level U (typ.) PE 30 A P < 700 V Protection level U at I (L/N-PE) Rated current I p N 1.75 kV N 16 A Rated voltage (AC) 120 V Rated voltage (DC) 150 V Requirements category acc. to IEC Requirements class, acc. to EN 61643-11 Type III 61643-11 T3 Response time Short-circuit current rating I 100 ns 1.5 kA SCCR Signalling contact Standards IEC61643-11, 250 V 10 A 1 NC EN61643-11 Temporary surge voltage (over-voltage) - Voltage type TOV 229 V AC/DC Creation date September 16, 2022 4:03:33 AM CEST Catalogue status 09.09.2022 / We reserve the right to make technical changes. 2