333 3 VESD33A2-03S www.vishay.com Vishay Semiconductors Dual-Line Unidirectional ESD Protection Diode in SOT-23 FEATURES Small SOT-23 package 2 1 AEC-Q101 qualified available 2-line unidirectional ESD protection Working range 33 V 3 Low leakage current I < 0.05 A R 20456 20512 1 Low load capacitance C < 18 pF D ESD immunity acc. IEC 61000-4-2 MARKING (example only) 15 kV contact discharge 15 kV air discharge e3 - pins plated with tin (Sn) YYY Material categorization: for definitions of compliance 20357 please see www.vishay.com/doc 99912 YYY = type code (see table below) XX = date code LINKS TO ADDITIONAL RESOURCES 3D Models ORDERING INFORMATION ENVIRONMENTAL AND QUALITY CODE PACKAGING CODE PART RoHS-COMPLIANT + LEAD ORDERING CODE 3K PER 7 REEL 10K PER 13 REEL NUMBER AEC-Q101 TIN (Pb)-FREE TERMINATIONS (EXAMPLE) (8 mm TAPE) (8 mm TAPE) (EXAMPLE) QUALIFIED PLATED 15K/BOX = MOQ 10K/BOX = MOQ STANDARD GREEN VESD33A2-03S - G - 3 -08 - VESD33A2-03S-G3-08 VESD33A2-03S H G - 3 -08 - VESD33A2-03SHG3-08 VESD33A2-03S - G - 3 - -18 VESD33A2-03S-G3-18 VESD33A2-03S H G - 3 - -18 VESD33A2-03SHG3-18 PACKAGE DATA PACKAGE MOLDING COMPOUND MOISTURE SOLDERING DEVICE NAME TYPE CODE WEIGHT NAME FLAMMABILITY RATING SENSITIVITY LEVEL CONDITIONS MSL level 1 Peak temperature VESD33A2-03S SOT-23 D33 8.1 mg UL 94 V-0 (according J-STD-020) max. 260 C ABSOLUTE MAXIMUM RATINGS (T = 25 C, between pin 1 - 3 or 2 - 3, unless otherwise specified) amb PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Peak pulse current Acc. IEC 61000-4-5, 8/20 s/single shot I 1.6 A PPM Peak pulse power Acc. IEC 61000-4-5, 8/20 s/single shot P 100 W PP Contact discharge acc. IEC 61000-4-2 10 pulses 15 kV ESD immunity V ESD Air discharge acc. IEC 61000-4-2 10 pulses 15 kV Operating temperature Junction temperature T -55 to +150 C J Storage temperature T -55 to +150 C stg Rev. 1.1, 25-Aug-2021 Document Number: 86149 1 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 DDD D XX XXVESD33A2-03S www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (T = 25 C, between pin 1 - 3 or 2 - 3, unless otherwise specified) amb PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT Protection paths Number of lines which can be protected N - - 1 lines channel Reverse stand off voltage Max. reverse working voltage V -- 33 V RWM Reverse voltage at I = 0.1 A V 33 - - V R R Reverse current at V = 33 V I - < 0.01 0.1 A R R Reverse breakdown voltage at I = 1 mA V 35.5 37.4 39.3 V R BR Reverse clamping voltage at I = I = 1.6 A, t = 8/20 s V - 56 62.5 V PP PPM p C at I = 1 A, t = 300 s V 0.9 1.1 1.2 V PP p F Forward clamping voltage at I = I = 1.6 A, t = 8/20 s V - 1.22 1.32 V PP PPM p F Dynamic resistance t = 100 ns (TLP 1 A to 12 A) r -3.6 - p dyn Capacitance at V = 0 V f = 1 MHz C 12 15 18 pF R D TYPICAL CHARACTERISTICS (T = 25 C, unless otherwise specified) amb Axis Title 120 10000 60 55 Rise time = 0.7 ns to 1 ns 100 50 45 80 1000 40 Measured according IEC 61000-4-5 35 (8/20 s - wave form) 60 30 53 25 20 40 100 15 27 10 20 5 0 0 10 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 -10 0 10 20 30 40 50 60 70 80 90 100 20557 t (ns) 23123 I (A) PP 2nd line 2nd line Fig. 1 - ESD Discharge Current Wave Form Fig. 3 - Typical Peak Clamping Voltage vs. Peak Pulse Current acc. IEC 61000-4-2 (330 / 150 pF) Axis Title 20 10000 100 8 s to 100 % 10 80 1000 60 20 s to 50 % 40 100 20 f = 1 MHz 1 0 10 0.01 0.1 1 10 100 010 20 30 40 23124 V (V) R 20548 t (s) 2nd line 2nd line Fig. 2 - 8/20 s Peak Pulse Current Wave Form Fig. 4 - Typical Capacitance vs. Reverse Voltage acc. IEC 61000-4-5 Rev. 1.1, 25-Aug-2021 Document Number: 86149 2 For technical questions, contact: ESDprotection vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 2nd line 2nd line I (%) I (%) PPM ESD 1st line 2nd line 1st line 2nd line 2nd line 2nd line 2nd line C (pF) V (V) D C