Model 100 www.vishay.com Vishay Spectrol 5 1 / (33.3 mm) Single Turn Wirewound 16 Precision Potentiometer FEATURES Gangable up to 6 sections Extra taps on request Bushing and servo mount types available Ohmic value range: 5 up to 35 k QUICK REFERENCE DATA Material categorization: for definitions of compliance Sensor type ROTATIONAL, single turn wirewound please see www.vishay.com/doc 99912 Output type Output by turrets Market appliance Industrial 5 Dimensions 1 / (33.3 mm) 16 ELECTRICAL SPECIFICATIONS PARAMETER STANDARD SPECIAL Total resistance: 5 to 20 k to 35 k Tolerance: 50 and above 3 % 1 % Below 50 5 % 3 % Linearity x total applied voltage for total resistance above 20 . End voltage 2.0 % of total applied voltage for 20 and below Linearity (independent): STANDARD BEST PRACTICAL 5 to 100 1.0 % 0.50 % 100 to 500 0.5 % 0.35 % 500 to 3 k 0.5 % 0.25 % 3 k to 15 k 0.5 % 0.20 % 15 k and above 0.5 % 0.15 % Noise 100 ENR (MIL-R-12934) Electrical angle 352 2 Power rating 2.75 W at 40 C ambient Insulation resistance 100 M min, 500 V DC Dielectric strength 1000 V , 60 Hz RMS Taps (extra) Up to 13 (position tolerance: 1) Phasing CCW taps of multiple sections aligned with CCW tap of section 1 to 1 Absolute minimum resistance Linearity x total resistance or 0.5 , whichever is greater ORDERING INFORMATION 10 0 S 12 032 03 X X X X OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL REQUEST o o GANGS N 1 GANGS N 2 100 B: bushing 1 470 = 47 470 = 47 xxxx S: servo 2 222 = 2.200 222 = 2.200 3 103 = 10 k 103 = 10 k 4 For ohmic value For ohmic value 5 range see electrical range see electrical 6 specification specification Revision: 26-Mar-15 Document Number: 57034 1 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000 Model 100 www.vishay.com Vishay Spectrol PART NUMBER DESCRIPTION (for information only) 100- 1 2 103 203 xxxx OHMIC VALUE OHMIC VALUE MODEL STYLE GANGS SPECIAL o o GANGS N 1 GANGS N 2 B: 1 S: 2 DIMENSIONS in inches (millimeters) BUSHING MOUNT: 100B/100-1... 0.010 0.031 0.705 0.875 3 1 (17.91) (22.22) 22 1/2 + 0.0000 1 - 0.0010 TYP. 0.242 MIN. 0.031 0.375 0.4062 MTG. (6.15) (9.52) 2 (10.32) 0.062 + 0.0000 (1.57) - 0.0003 0.2497 (6.34) 0.875R (22.22) MAX. 1.312 (33.32) 0.562 (14.27) 0.031 3 / - 32 UNEF 2A 0.062 (1.57) 8 0.125 MTG. FACE (3.18) SERVO MOUNT: 100S/100-2... 0.010 0.031 0.800 0.562 1 (20.32) (14.27) 0.337 MIN. 2 (8.56) 0.073 (1.85) 0.062 (1.57) 13 + 0.0000 CW 0.062 (1.57) - 0.0003 0.2497 SCHEMATIC (6.34) + 0.0000 - 0.0005 1.1875 1.312 1.312 1 ADD 0.566 0.002 (14.38) FOR EACH (30.16) (33.32) (33.32) MTG. ADDITIONAL SECTION 1.187 TOLERANCES: UNLESS OTHERWISE NOTED. MTG. FACE (30.15) DECIMALS 0.005 ANGLES 2 MAX. Revision: 26-Mar-15 Document Number: 57034 2 For technical questions, contact: sferprecisionpot vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc 91000