TLP2309(TPL,E(T Toshiba

TLP2309 Photocouplers Infrared LED & Photo IC TLP2309TLP2309TLP2309TLP2309 1. 1. ApplicationsApplications 1. 1. ApplicationsApplications Industrial Inverters Switching Power Supplies High-Speed Digital Interfacing 2. 2. 2. 2. GeneralGeneralGeneralGeneral The Toshiba TLP2309 consists of a high-output infrared LED coupled with a high-speed photo-diode-transistor chip. It is housed in the SO6 package. The TLP2309 guarantees operation at up to 110 and on supplies both 3.3 V and 5 V. Also, since the TLP2309 guarantees a creepage / clearance distance 5.0 mm and internal isolation thickness 0.4 mm, this product is in the reinforced insulation class according to international safety standards. 3. 3. FeaturesFeatures 3. 3. FeaturesFeatures (1) Inverter logic type (open collector output) (2) Package: SO6 (3) Operating temperature: -40 to 110 (4) Supply voltage: 3.3 V / 5 V (5) Data transfer rate: 1 Mbit/s (typ.) (NRZ) (6) Common-mode transient immunity: 15 kV/ s (min) (7) Isolation voltage: 3750 Vrms (min) (8) Safety standards UL-recognized: UL 1577, File No.E67349 cUL-recognized: CSA Component Acceptance Service No.5A File No.E67349 (Note 1) VDE-approved: EN 60747-5-5, EN 62368-1 (Note 1)(Note 1)(Note 1) CQC-approved: GB4943.1, GB8898 Thailand Factory Note 1: When a VDE approved type is needed, please designate the Option (V4)Option (V4)Option (V4)Option (V4). 4. Packaging and Pin Configuration 4. 4. 4. Packaging and Pin ConfigurationPackaging and Pin ConfigurationPackaging and Pin Configuration 1: Anode 3: Cathode 4: GND 5: V (Output) O 6: V CC 11-4L1S Start of commercial production 2011-04 2015-2019 2019-11-26 1 Toshiba Electronic Devices & Storage Corporation Rev.8.0TLP2309 5. 5. 5. 5. Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note)Internal Circuit (Note) Note: A 0.1-F bypass capacitor must be connected between pin 6 and pin 4. 6. 6. Principle of OperationPrinciple of Operation 6. 6. Principle of OperationPrinciple of Operation 6.1. 6.1. 6.1. 6.1. Truth TableTruth TableTruth TableTruth Table Input LED Output H ON L L OFF H 6.2. 6.2. Mechanical ParametersMechanical Parameters 6.2. 6.2. Mechanical ParametersMechanical Parameters Characteristics Min Unit Creepage distances 5.0 mm Clearance distances 5.0 Internal isolation thickness 0.4 2015-2019 2019-11-26 2 Toshiba Electronic Devices & Storage Corporation Rev.8.0