DATA SHEET OLI300: Miniature High-Speed Optocoupler for Hybrid Assembly Features Electrical parameters guaranteed over -55 C to +125 C ambient temperature range 6 54 1500 VDC electrical isolation Cathode VCC VOUT Small footprint for a hybrid device High-speed, 1 Mbps typical Open collector output High reliability and rugged construction Similar to 6N135/136, 4N55 type optocouplers 1 3 Radiation tolerant Anode GND Shield Custom packages are available (contact Isolink) K043K043 Figure 1. OLI300 Block Diagram Description The OLI300 is suitable for interfacing Transistor-to-Transistor Figure 1 shows the OLI300 functional block diagram. Table 1 Logic (TTL) to Low Power Schottky Transistor-Transistor Logic provides the OLI300 absolute maximum ratings. Table 2 provides (LSTTL), TTL, or Complementary Metal Oxide Semiconductor the OLI300 electrical specifications. (CMOS), as well as wide bandwidth analog applications. Figures 2 through 4 illustrate the OLI300 typical performance Each OLI300 has an LED and an integrated photodiode transistor characteristics. Figure 5 shows the OLI300 switching test circuit. detector mounted and coupled in a miniature custom ceramic Figure 6 provides the OLI300 package dimensions. package that provides 1500 VDC of electrical isolation between the input and output. The integrated photodiode transistor improves the switching speed by orders of magnitude as compared to standard phototransistors by reducing the base-to-collector capacitance. Device mounting is achieved by a standard hybrid assembly with non-conductive epoxies. Gold or aluminum wire bonding can be used to make electrical connections for maximum placement flexibility. Note: Certain cleaning processes may be harmful to this device. Contact Isolink for details. Phone 408 946-1968 Fax 408 946-1960 hirel.sales skyworksinc.com www.skyworksinc.com 202333D Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice September 12, 2017 1 DATA SHEET OLI300: MINIATURE HIGH-SPEED OPTOCOUPLER FOR HYBRID ASSEMBLY 1 Table 1. OLI300 Absolute Maximum Ratings Parameter Symbol Minimum Maximum Units Coupled 2 Input to output isolation voltage VDC -1500 +1500 V Storage temperature range TSTG -65 +150 C Operating temperature range TA -55 +125 C Mounting temperature range (3 minutes maximum) +240 C Input Diode Average input current IDD 20 mA Peak forward current (1 ms duration) IF 40 mA Reverse voltage VR 5 V Power dissipation PD 36 mW Output Detector Average output current 8 mA Peak output current 16 mA Supply voltage VCC -0.5 +18.0 V Output voltage VOUT -0.5 +18.0 V Power dissipation PD 50 mW Derate linearly from 100 C 1.4 mW/C 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to the device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. 2 Measured between pins 1 and 6 shorted together, and pins 2, 3, 4, and 5 shorted together. TA = 25C and duration = 1 s. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. 1 Table 2. OLI300 Electrical Specifications (TA = -55 C to +125 C, Unless Otherwise Noted) Parameter Symbol Test Condition Minimum Typical Maximum Units 2 Current transfer ratio (CTR) CTR IF = 10.0 mA, VO = 0.4 V, VCC = 4.5 V 15.0 25.0 % Logic low output voltage VOL IF = 10.0 mA, IOL = 1.5 mA, 0.15 0.4 V VCC = 4.5 V Logic high output current IOH IF = 0 mA, VO = VCC = 15.0 V 0.05 100.0 A Logic low supply current ICCL IF = 10 mA, VCC = 15 V, VO = open 40 200 A Logic high supply current ICCH IF = 0 mA, VCC = 15.0 V, VO = open 0.05 10.0 A Input forward voltage VF IF = 10.0 mA 1.8 2.5 V Input reverse breakdown voltage BVR IR = 10 A 3 V 3 Input to output leakage current II O RH 50%, TA = 25 C, VI O = 1500 VDC 1 A Propagation delay time: Logic high to low tPHL IF = 10.0 mA, VCC = 5.0 V, 0.3 1.0 s RL = 4.1 k Logic low to high tPLH IF = 10.0 mA, VCC = 5.0 V, 0.5 2.0 s RL = 4.1 k 1 Performance is guaranteed only under the conditions listed in the above table. 2 Current transfer ratio is defined as the ratio of the output collector current IC to the forward LED current IF, multiplied by 100%. 3 Measured between pins 1 and 6 shorted together, and pins 2, 3, 4, and 5 shorted together. TA = 25C and duration = 1 s. Phone 408 946-1968 Fax 408 946-1960 hirel.sales skyworksinc.com www.skyworksinc.com 2 September 12, 2017 Isolink Proprietary Information Products and Product Information are Subject to Change Without Notice 202333D