RS9116 Connectivity Product Family TM TM n-Link and WiSeConnect Redpine Signals RS9116 family of SoCs and modules provides a comprehensive multi-protocol wireless connectivity solution including 802.11 a/b/g/n (2.4 GHz and 5 GHz) dual-mode Bluetooth 5. Solution Highlights Co-existence of multiple wireless protocols managed by an internal protocol arbitration manager Ultra-low power consumption with multiple power modes to reduce the system energy consumption Multiple levels of security including WPA/WPA2 Personal, WPA2 Enterprise, SSL/TSL, to create a highly secure system Fully integrated and wireless certified modules with multiple sizes as small as 4.63 mm x 7.90 mm Multiple software architectures (hosted and embedded) and host interfaces (SDIO, USB, SPI, UART) for easy integration with different processor families and operating systems Footprint compatible single band and dual band modules as well as hosted and embedded modules for easy migration within the product family Leading edge RF performance providing long range and higher throughputs Features Support for concurrent Wi-Fi, dual-mode Bluetooth 5 Wi-Fi Compliant to single-spatial stream IEEE 802.11 a/b/g/n with single TM Embedded Mode (WiSeConnect ) band (2.4 GHz), and dual band (2.4 and 5 GHz) support Available host interface: UART, SPI, SDIO*, and USB CDC Support for 20 MHz channel bandwidths TCP throughput > 20Mbps over SDIO host interface with 20 MHz Transmit power up to +20dBm* with integrated PA bandwidth Receive sensitivity as low as -97 dBm* Support for Embedded Client mode, Access Point mode (Upto 8 clients), Concurrent Client and Access Point mode, and Enterprise Bluetooth Security Compliant to dual-mode Bluetooth 5 Supports advanced security features: WPA/WPA2-Personal and <8 mA transmit current in Bluetooth 5 mode, 2 Mbps data rate Enterprise* Data rates: 125 Kbps, 500 Kbps, 1 Mbps, 2Mbps, 3 Mbps Integrated TCP/IP stack (IPV4/IPV6), HTTP/HTTPS, DHCP, ICMP, Operating Frequency Range:- 2.402 GHz - 2.480 GHz SSL 3.0/TLS1.2, WebSockets, IGMP, DNS, DNS-SD, SNMP, FTP Client, Bluetooth 2.1 + EDR, Bluetooth Low Energy 4.0 / 4.1 / 4.2 / 5.0 MQTT* Bluetooth Low Energy 1 Mbps, 2 Mbps and Long Range modes Bluetooth inbuilt stack support for L2CAP, RFCOMM, SDP, SPP, GAP Bluetooth Low Energy Secure connections Bluetooth profile support* for GAP, SDP, L2CAP, RFCOMM, SPP, GATT, Bluetooth Low Energy supports central role and peripheral role PBAP concurrently. Wireless firmware upgrade and provisioning Bluetooth auto rate and auto TX power adaptation Support for concurrent Wi-Fi, dual-mode Bluetooth 5 Scatternet* with two slave roles while still being visible. Security RF Features Accelerators: AES128/256 in Embeded Mode Integrated baseband processor with calibration memory, RF WPA/WPA2-Personal, WPA/WPA2 Enterprise for Client* transceiver, high-power amplifier, balun and T/R switch Secure Firmware upgrade* with backup Integrated Antenna and u.FL connector Diversity is supported Power Consumption Wi-Fi Standby Associated mode current: 50uA 1 second beacon Operating Modes TM listen interval Hosted mode (n-Link ): Wi-Fi stack, Bluetooth stack and profiles and Wi-Fi 1 Mbps Listen current: 14mA all network stacks reside on the host processor Wi-Fi LP chain Rx current: 19mA Embedded mode (WiSeConnect): Wi-Fi stack, TCP/IP stack, IP Deep sleep current <1uA, Standby current (RAM retention) < 10uA modules, Bluetooth stack and some profiles reside in RS9116 Some of the Bluetooth profiles reside in the host processor TM Hosted Mode (n-Link ) Available host interfaces: SDIO 2.0 and USB HS Support for 20 MHz and 40 MHz channel bandwidths Application data throughput up to 50 Mbps (Hosted Mode) in 802.11n with 20 MHz bandwidth Host drivers for Linux Support for Client mode, Access point mode (Upto 16 clients), Concurrent Client and Access Point mode, Enterprise Security www.redpinesignals.comSoftware and Regulatory Certifications Packages 2 Wi-Fi Alliance Module packages with and without antenna 2 Bluetooth Qualification SoC packages: QFN 2 Regulatory certifications (FCC, IC, ETSI/CE, TELEC) Evaluation Kit: Operating Conditions Single band P/N: RS9116X-SB-EVK1 Single supply: 2.1 to 3.6 V or 1.85 V Dual band P/N: RS9116X-DB-EVK1 Operating temperature: -40C to +85 C (Industrial Grade) Package Options Module Packages SoC Packages Package Integrated Package Type Dimensions (mm) Frequency Band Note Package Code Type of Package Dimensions, Pitch (mm) Frequency Band Code Antenna Single Band (2.4 RS9113 QMS QFN, 84 7 x 7 x 0.85, 0.5 Single Band (2.4 GHz) AA0 LGA, 101 14 x 15 x 2.1 No GHz) compatible Antenna Single Band (2.4 RS9113 AA1 LGA, 79 16 x 27 x 3.1 and u.FL GHz) compatible Connector Dual Band (2.4 / 5 Part Ordering Options CC0 LGA, 173 9.1 x 9.8 x 1.2 No GHz) SoC Packages Part Number Wireless Module Packages (ppg) Antenna (ppg) Dual Band (2.4 / 5 CC1 LGA, 107 15.0 x 15.70 x 2.2 and u.FL GHz) Connector TM Hosted Connectivity (n-Link ) Single Band (2.4 RS9116N-SB00-ppg SBW+Bluetooth 5 QMS AA0, AA1, B00 B00 LGA, 126 4.63 x 7.90 x 0.9 No GHz) RS9116N-DB00-ppg DBW+Bluetooth 5 None CC0, CC1, MB0, HB0 Dual Band (2.4 / Two u.FL TM MB0 M.2, 75 22 x 30 Embedded Connectivity (WiSeConnect ) 5 GHz) Connectors RS9116W-SB00-ppg SBW+Bluetooth 5 QMS AA0, AA1, B00 Half Mini PCIe Dual Band (2.4 / 5 Two u.FL USB inter- HB0 26.8 x 30 RS9116W-DB00-ppg DBW+Bluetooth 5 None CC0, CC1 Card, 52 GHz) Connectors face Note: Replace ppg with desired SoC / Module Packages code SBW: Single Band Wi-Fi (2.4 GHz) DBW: Dual Band Wi-Fi (2.4/5 GHz) Block diagram Note: The BTSIG certified production parts for this product family will be available in early 2019. 1 2 : Subject to change. Contact Redpine Signals for final numbers. :Contact Redpine for availability. Redpine Signals, Inc. 2107 North First Street, Suite 540, San Jose, California 95131, United States of America. Phone: +1-408-748-3385 Fax: +1-408-705-2019 Email: sales redpinesignals.com Website: www.redpinesignals.com Copyright 2020 Redpine Signals, Inc. All Rights Reserved www.redpinesignals.com