NOTES: REVISION AO 1. HIDDEN LINES ARE USED TO SHOW POLARIZATION FFSD-XX-X-XX.XX-01-X-X-XXX WHEN USING -N OPTION. C 2. REPRESENTS A CRITICAL DIMENSION. 3. FFSD CABLE ASSEMBLIES ARE LEAD FREE. OPTION 4. ALL ASSEMBLIES TO BE 100% ELECTRICALLY TESTED DO NOT -RW: REVERSE WIRING FOR SHORTS AND OPENS. SCALE FROM (NOT AVAILABLE WITH -RN1 OR -RN2) C 5. ALL ASSEMBLIES TO BE 100% HI-POT TESTED AT 630V. THIS PRINT No OF POSITIONS -X: DAISY CHAIN (MINIMUM 2.00 50.8 , 6. STRAIN RELIEF TO WITHSTAND 5LB 22N STRAIGHT PULL. -02 THRU -25 1.00 25.4 INCREMENTS) 7. NOTE DELETED. (PER ROW) -R: REVERSED 8. WHEN CUTTING CABLE TO LENGTH, CONDUCTORS SHOULD NOT EXTEND (NOT AVAILABLE WITH -M OR -O) PAST THE CABLE INSULATION, EXTENDING LESS THAN 25% OF CABLE END ASSEMBLY (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) THICKNESS ON CONSECUTIVE AND LESS THAN 50% OF CABLE THICKNESS -S: SINGLE END -RN1: REVERSE POLARIZATION NOTCH ON NON-CONSECUTIVE STRANDS IS CONSIDERED A PROCESS INDICATOR. -D: DOUBLE END (NOT AVAILABLE WITH -RW OR -RN2) 9. REFERENCE FFSD-XX-XX-X-N-XXX FOR CONNECTOR ASSEMBLY -RN2: REVERSE POLARIZATION NOTCH DIMENSIONS AND ITS REQUIREMENTS. ASSEMBLY LENGTH (NOT AVAILABLE WITH -RW OR -RN1) 10. COLORED WIRE MUST MATCH FIRST POSITION INDICATOR -X, -R, -M & -O OPTION: 2.00 50.8 MINIMUM -M: MIDDLE REVERSE ON THE FIRST CONNECTOR FOR ALL OPTIONS WITH THE ALL OTHER OPTION: 1.00 25.4 MINIMUM (NOT AVAILABLE WITH -R OR -O) EXCEPTION OF -RW. (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) 11. FOR LENGTHS LESS THAN 12.5 , TOLERANCE SHALL BE +/-.125, LEAD STYLE -O: OUTSIDE REVERSE ALL OTHER LENGTHS SHALL BE +/-1%. (NOT AVAILABLE WITH -R OR -M) (MINIMUM 2.00 50.8 , 1.00 25.4 INCREMENTS) PLATING OPTIONS C -SR: STRAIN RELIEF - LEAVE BLANK FOR STANDARD, USE C-67-L (NOT AVAILABLE WITH -O, -M, XX.XX XX.X x 25.4 1% -S: USE C-67-S -R, OR -DXX) (SEE NOTE 8 & 11) -F: USE C-67-F (SOLD AS ASSEMBLIES ONLY) STANDARD POLARIZATION NOTCH -N: POLARIZATION NOTCH (NOT AVAILABLE IN -02 THRU -04) (LEAVE BLANK FOR -02, -03, -04) .075 1.91 REF XX.XX XX.X x 25.4 1% (SEE NOTE 8 & 11) .120 3.05 C C REF (No OF POS x .050 1.27 ) + .165 4.19 REF .010 0.25 MAX RED WIRE TO SIDE .006 0.15 MAX CABLE OVERHANG 2 OF FIRST POS INDICATOR (SEE NOTE 8) -N OPTION +.006 +0.15 C .200 5.08 -.003 -0.08 .040 1.02 REF FIG 2 -RN1 OPTION -N OPTION 1 NOTCH DENOTES (FFSD-10-S-XX.XX-01-X-N SHOWN) FIRST POSITION (SAME AS FIG 1, DIFFERENT AS SHOWN) -RN2 OPTION FIG 1 (FFSD-10-D-XX.XX-01-X-N SHOWN) PROPRIETARY NOTE * * UNLESS OTHERWISE SPECIFIED, THIS DOCUMENT CONTAINS CONFIDENTIAL AND PROPRIETARY INFORMATION AND ALL DESIGN, DIMENSIONS ARE IN INCHES. RED WIRE TO OPPOSITE MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS SIDE OF FIRST POS. INDICATOR TOLERANCES ARE: AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, DECIMALS ANGLES INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR .XX: .01 .3 2 520 PARK EAST BLVD, NEW ALBANY, IN 47150 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY .XXX: .005 .13 OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS PHONE: 812-944-6733 FAX: 812-948-5047 .XXXX: .0020 .051 WRITTEN CONSENT OF SAMTEC, INC. e-Mail info SAMTEC.com code 55322 MATERIAL: DO NOT SCALE DRAWING SHEET SCALE: 2:1 DESCRIPTION: INSULATORS: PBT UL94V-0, COLOR: BLACK .050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY CONTACT: BeCu DWG. NO. WIRE: 30 AWG, 7/38, TINNED, STRANDED WITH GRAY PVC INSULATOR FIG 11 FFSD-XX-X-XX.XX-01-X-X-XXX PLATING: .000010 GOLD OVER .000050 NICKEL (FFSD-10-X-XX.XX-01-X-N-RW SHOWN) REMAINDER: .000200 REF TIN OVER .000050 NICKEL F: DWG MISC MKTG FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW SHEET OF BY: T NEWTON 02/15/2008 1 4REVISION AO FIG 3 (FFSD-10-D-XX.XX-01-X-N-RN1 SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) FIRST POSITION INDICATOR FIRST CONNECTOR FIRST POSITION INDICATOR FIRST POSITION INDICATOR XX.XX XX.X x 25.4 .13 3.2 XX.XX XX.X x 25.4 .13 3.2 (MIN 2 ) (MIN 2 ) MIDDLE CONNECTOR REVERSED WHEN DAISY CHAINED OUTSIDE CONNECTOR REVERSED WHEN DAISY CHAINED FIG 5 FIG 4 (FFSD-10-D-XX.XX-01-X-N-DXX-M SHOWN) (FFSD-10-D-XX.XX-01-X-N-DXX-O SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) FIRST POSITION INDICATOR (2.00 50.8 MINIMUM, 1.00 25.4 INCREMENTS) (2.00 50.8 MINIMUM, 1.00 25.4 INCREMENTS) SECOND CONNECTOR (FFSD-10-D-XX.XX-01-X-N-RN2 SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) FIRST CONNECTOR FIRST POSITION INDICATOR FIRST POSITION INDICATOR XX.XX XX.X x 25.4 .13 3.2 FIRST POSITION INDICATOR (MIN 2 ) XX.XX XX.X x 25.4 .13 3.2 (MIN 2 ) FIRST POSITION INDICATOR FIG 7 (FFSD-10-D-XX.XX-01-X-N-DXX SHOWN) (SAME AS FIG 1, DIFFERENT AS SHOWN) (2.00 50.8 MINIMUM, 1.00 25.4 INCREMENTS) SECOND CONECTOR PROPRIETARY NOTE * * THIS DOCUMENT CONTAINS CONFIDENTIAL AND BOTH CONNECTORS REVERSED WHEN DAISY CHAINED NOTE: PROPRIETARY INFORMATION AND ALL DESIGN, MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS -RN1 = REVERSE NOTCH ON 1ST CONNECTOR ONLY AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC, ( NOT AVAILABLE WITH -R OPTION) INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE -RN2 = REVERSE NOTCH ON 2ND CONNECTOR ONLY 520 PARK EAST BLVD, NEW ALBANY, IN 47150 OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR FIG 6 REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY PHONE: 812-944-6733 FAX: 812-948-5047 (NOT AVAILABLE WITH -R OPTION) (FFSD-10-D-XX.XX-01-X-N-DXX-R SHOWN) OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS e-Mail info SAMTEC.com code 55322 WRITTEN CONSENT OF SAMTEC, INC. (SAME AS FIG 1, DIFFERENT AS SHOWN) (REVERSE NOTCH NOT AVAILABLE WITH -RW OR ANY DESCRIPTION: (NOT AVAILABLE WITH -RN1 OR -RN2 OPTION) DO NOT SCALE DRAWING DAISY CHAIN OPTIONS) .050 x .050 DOUBLE ROW FEMALE IDC ASSEMBLY (2.00 50.8 MINIMUM, 1.00 25.4 INCREMENTS) DWG. NO. SHEET SCALE: 2:1 FFSD-XX-X-XX.XX-01-X-X-XXX F: DWG MISC MKTG FFSD-XX-X-XX.XX-01-X-X-XXX-MKT.SLDDRW SHEET OF BY: T NEWTON 02/15/2008 2 4