2SC0650P2Ax-17 2SC0650P2Ax-17 Preliminary Data Sheet Dual-Channel High-Power High-Frequency SCALE-2 Driver Core Short Description The SCALE-2 dual driver core 2SC0650P2Ax-17 combines highest power density with broad applicability. The driver is designed for both high-power and high-frequency applications requiring maximum reliability. It is suitable for IGBTs with reverse voltages up to 1700V and also features a dedicated MOSFET mode. The embedded paralleling capability allows easy inverter design covering higher power ratings. Multi-level topologies are also supported. CONCEPTs patented planar-transformer technology assures efficient and high-voltage isolation with long-term reliability and sets new milestones in compactness, interference immunity and performance. Its outstanding EMC with a dv/dt strength of more than 100V/ns allows safe and reliable operation in even the toughest industrial applications. Thanks to its ultra-flat design with an insertion height of max. 6.5mm and a footprint of 61.7mm x 57.2, the 2SC0650P2Ax-17 can efficiently utilize even the most constrained insertion spaces. Compared with conventional drivers, the highly integrated SCALE-2 chipset allows about 85% of components to be dispensed with. This advantage is impressively reflected in increased reliability at simultaneously minimized cost. Equipped with the latest SCALE-2 technology, the driver core opens up the possibility of working with clock frequencies of up to 150kHz at best-in-class efficiency. The 2SC0650P2Ax-17 combines a complete two- channel driver core with all components required for driving, such as an isolated DC/DC converter, short-circuit protection, advanced active clamping as well as supply voltage monitoring. Each of the two output channels is electrically isolated from the primary side and the other secondary channel. Product Highlights Applications Wind power converters Ultra-flat dual channel driver Industrial drives Highly integrated SCALE-2 chipset Traction applications Planar transformer technology Electro/hybrid drive commercial vehicles Blocking voltages up to 1700V Driving parallel-connected large IGBTs Switching frequency up to 150kHz High gate-current driving applications Short delay and extremely small jitter Induction heating Gate current 50A, 6W output power per channel Switched mode power supplies (SMPS) +15V/-10V gate driving Laser and medical (MRT, CT, X-Ray) Safe isolation to EN 50178 Laser technology UL compliant IGBT-Driver.com Page 1 2SC0650P2Ax-17 Preliminary Data Sheet Safety Notice The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high- voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged. Important Product Documentation This data sheet contains only product-specific data. For a detailed description, must-read application notes and important information that apply to this product, please refer to 2SC0650P Description & Application Manual on www.IGBT-Driver.com/go/2SC0650P Absolute Maximum Ratings Parameter Remarks Min Max Unit Supply voltage V VDC to GND 0 16 V DC Supply voltage V VCC to GND 0 16 V CC Logic input and output voltages Primary side, to GND -0.5 VCC+0.5 V SOx current Failure condition, total current 20 mA Gate peak current I Note 1 -50 +50 A out External gate resistance Turn-on and turn-off 0.5 Average supply current I Notes 2, 3 1300 mA DC Output power Ambient temperature <70C (Notes 4, 5) 6.5 W Ambient temperature 85C (Note 4) 6 W Switching frequency F 150 kHz Test voltage (50Hz/1min.) Primary to secondary (Note 15) 5000 V AC(eff) Secondary to secondary (Note 15) 4000 V AC(eff) dV/dt Rate of change of input to output voltage (Note 11) 100 kV/s Operating voltage Primary/secondary, secondary/secondary 1700 V peak Operating temperature Note 5 -40 +85 C Storage temperature -40 +90 C Recommended Operating Conditions Power Supply Remarks Min Typ Max Unit Supply voltage V VDC to GND 14.5 15 15.5 V DC Supply voltage V VCC to GND 14.5 15 15.5 V CC Page 2 INTELLIGENT POWER ELECTRONICS