PAN9026 PAN9026 Wi-Fi Dual Band 2.4 GHz and 5 GHz and Bluetooth Module Product Specification Rev. 1.2 Wireless Modules PAN9026 Wi-Fi/Bluetooth Module Power management with sleep clock Overview Coexistence interface for arbitration of colocated The PAN9026 is a 2.4 GHz and 5GHz ISM band WLAN, Bluetooth, or Mobile Wireless Wi-Fi and Bluetooth radio module, which includes a System (e.g. LTE) wireless radio for easy integration of Wi-Fi and Generic interfaces include SDIO 3.0 and Bluetooth connectivity into various electronic high-speed UART for host processor connection devices. Software Linux driver Features Characteristics Dual band 2.4 GHz and 5GHz 802.11a/b/g/n Surface Mount Type (SMT) Wi-Fi/Bluetooth combined module 17.5mm x 10.0mm x 2.6mm Supports 802.11i security standards through Marvell 88W8977 WLAN 2.4 GHz and 5GHz AES, CCMP, and more security mechanisms and Bluetooth single-chip solution inside 802.11e Quality of Service is supported for TX Power 16dBm 802.11b multimedia applications RX Sensitivity -98dBm 802.11b DSSS IEEE 802.11n-compliant, 1x1 spatial stream with 1Mbps data rates up to MCS7 150Mbps IEEE 802.11n 20MHz and 40MHz Bluetooth 5.0, includes Low Energy (LE) channel bandwidth Dual simultaneous and independent WLAN and Long and Short Guard Interval support Bluetooth operation Power supply 3.3V, 2.2V, 1.8V Dynamic Rapid Channel Switching (DRCS) for Current consumption Wi-Fi typical 400mA TX simultaneous operation in 2.4GHz and 5GHz and 70mA RX bands SDIO 1-bit or 4-bit Indoor location and navigation with Wide temperature range of -30C to 85C IEEE 802.11mc Block Diagram VIO 1.8 V PAN9026 VDD 2.2 V Wi-Fi & Bluetooth Radio Module Crystal Crystal VDD 1.8 V IEEE 802.11 a/b/g/n 32.768 kHz 26 MHz Bluetooth 5.0 (BR, LE & EDR) 32 kHz DISABLE SPI GPIOs BPF PDN Chip Antenna JTAG 88W8977 SPDT DPX UART Radio SoC COEX Status LED s VIO SD MCU Ready SDIO Interface PCM Interface SPDT Factory Reset CNTL VIO RF 3.3 V RF SW RF Pad Wake Up s V SPDT Product Specification Rev. 1.2 Page 2 50 Ohm