MP8715DN-LF Monolithic Power Systems

MP8715 100% Duty Cycle Synchronous 4A, 21V, 500kHz Step-Down Converter The Future of Analog IC Technology DESCRIPTION FEATURES 4A Output Current The MP8715 is a 500 kHz fixed-frequency Wide 4.5V to 21V Input Operation Range PWM synchronous step-down regulator. 100% Duty Cycle Support MP8715 operates from a 4.5V to 21V input and generates an output voltage form 0.8V to V 120m/50m Internal Power MOSFET IN with 100% duty cycle operation. All Ceramic Capacitor Design Up to 95% Efficiency The MP8715 integrates a 120m high-side 500kHz Fixed Switching Frequency switch and a 50m synchronous rectifier for Adjustable Output from 0.8V to Vin high efficiency without an external Schottky External Soft-Start diode. It offers a very compact solution to Frequency Synchronization Input achieve 4A continuous output current over a Power OK Indicator wide input supply range with excellent load and line regulation. Internal Compensation Over Current Hiccup and Thermal Protection External soft start and power good indication Available in 8-pin SOIC Package with an meet flexible design requirement. Exposed Pad and 14-pin QFN3x4 package APPLICATIONS The MP8715 is available in a space saving 8- pin SOIC package with an exposed pad and Cable eMTAs 3mmx4mm 14-pin QFN package. P/ASIC/DSP/FPGA Core and I/O Supplies Printers and LCD TVs Digital Set Top Boxes Network and Telecom Equipment Point of Load Regulators All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. MPS and The Future of Analog IC Technology are registered trademarks of Monolithic Power Systems, Inc. TYPICAL APPLICATION 4.5V-21V Efficiency VIN V =1.2V OUT 95 1 3 V =5V VIN C3 90 IN BST 100nF 85 1.2V/4A 6 2 POK POK SW VOUT 80 MP8715 75 V =12V IN 4 7 VCC R1 ON/OFF EN/SYNC 70 4.99k Rt 47k 65 5 FB V =21V IN 60 SS 8 GND 55 R2 C5 9 10k 10nF 50 0 0.5 1 1.5 2 2.5 3 3.5 4 OUTPUT CURRENT (A) SOIC8E Package MP8715 Rev. 1.01 www.MonolithicPower.com 1 6/13/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved. MP8715 4A, 21V, 500kHz, STEP DOWN CONVERTER WITH 100% DUTY CYCLE OPERATION ORDERING INFORMATION Part Number Package Top Marking MP8715DN* SOIC8E MP8715 MP8715DL** 3x4 QFN14 MP8715 * For Tape & Reel, add suffix Z (e.g. MP8715DNZ) For RoHS compliant packaging, add suffix LF (e.g. MP8715DNLFZ) ** For Tape & Reel, add suffix Z (e.g. MP8715DLZ) For RoHS compliant packaging, add suffix LF (e.g. MP8715DLLFZ) PACKAGE REFERENCE TOP VIEW PIN 1 ID TOP VIEW IN 1 14 SS SW 2 13 GND VIN 1 8 SS SW 3 12 GND SW 2 7 VCC 9 SW 4 11 GND GND BST 3 6 POK SW 5 10 VCC EN/SYNC 4 5 FB BST 6 9 POK EN/SYNC 7 8 FB EXPOSED PAD ON BACKSIDE SOIC8E 3x4 QFN14 (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC SOIC8E (Exposed Pad).......... 50...... 10 .. C/W VIN-0.3V to 23V 3x4 QFN14............................48...... 11 .. C/W SW -0.3V (-5V for <10ns) to 23V FB, SS...... 0.3V to +6.5V Notes: 1) Exceeding these ratings may damage the device. EN/SYNC, POK, VCC.... 0.3V to +6.5V 2) The maximum allowable power dissipation is a function of the BST to SW ..................................0.3V to +6.5V maximum junction temperature T (MAX), the junction-to- J (2) ambient thermal resistance , and the ambient temperature JA Continuous Power Dissipation (T = +25C) A T . The maximum allowable continuous power dissipation at A SOIC8E...................................................... 2.5W any ambient temperature is calculated by P (MAX) = (T D J (MAX)-T )/ . Exceeding the maximum allowable power A JA 3x4 QFN14 ................................................ 2.6W dissipation will cause excessive die temperature, and the Junction Temperature...............................150C regulator will go into thermal shutdown. Internal thermal Lead Temperature ....................................260C shutdown circuitry protects the device from permanent damage. Storage Temperature ..............65C to +150C 3) The device is not guaranteed to function outside of its operating conditions. (3) 4) Measured on JESD51-7, 4-layer PCB. Recommended Operating Conditions Input Voltage V ..............................4.5V to 21V IN Output Voltage V ...........................0.8V to V OUT IN Operating Junction Temp. (T ). -40C to +125C J MP8715 Rev. 1.01 www.MonolithicPower.com 2 6/13/2013 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2013 MPS. All Rights Reserved.