MP2162 2A, 6V, 1.5MHz, 17 A I , COT Q Synchronous Step Dwon Switcher In Ultra-small 2x1.5mm QFN The Future of Analog IC Technology DESCRIPTION FEATURES The MP2162 is a monolithic step-down switch Very Low I : 17 A Q mode converter with built-in internal power Default 1.5MHz Switching Frequency MOSFETs. It achieves 2A continuous output EN and Power Good for Power Sequencing current from a 2.5V to 6V input voltage with Ultra-small 2x1.5mm QFN8 Package excellent load and line regulation. The output Wide 2.5V to 6V Operating Input Range voltage can be regulated as low as 0.6V. Output Adjustable from 0.6V Up to 2A Output Current The Constant-On-Time control scheme provides fast transient response and eases loop 100% Duty Cycle in Dropout stabilization. Fault condition protection includes 100m and 60m Internal Power MOSFET Switches cycle-by-cycle current limiting and thermal shutdown. Cycle-by-Cycle Over Current Protection Short Circuit Protect with Hiccup Mode The MP2162 is available in the small QFN8 Stable with Low ESR Output Ceramic 2.0x1.5mm package and requires a minimum Capacitors number of readily available standard external components. APPLICATIONS The MP2162 is ideal for a wide range of Wireless/Networking Cards applications including High Performance DSPs, Portable Instruments FPGAs, PDAs, and portable instruments. Battery Powered Devices Low Voltage I/O Systems Power All MPS parts are lead-free and adhere to the RoHS directive. For MPS green status, please visit MPS website under Products, Quality Assurance page. f MPS and The Future of Analog IC Technology are registered trademarks o Monolithic Power Systems, Inc. TYPICAL APPLICATION MP2162 Rev. 1.03 www.MonolihicPower.com 1 6/8/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2017 MPS. All Rights Reserved. MP2162 2A, 6V, 1.5MHz SYNCHRONOUS STEP-DOWN SWITCHER ORDERING INFORMATION Part Number* Package Top Marking MP2162GQH QFN-8 (2.0mm x1.5mm) AZ * For Tape & Reel, add suffix Z (e.g. MP2162GQHZ) PACKAGE REFERENCE TOP VIEW EN 1 8 PG 2 7 FB VIN AGND 3 6 SW OUT 4 5 PGND QFN-8 (2.0mm x1.5mm) (1) (4) ABSOLUTE MAXIMUM RATINGS Thermal Resistance JA JC Supply Voltage V ...................................... 6.5V QFN-8 (2.0mm x1.5mm) ........ 110 ..... 55 ... C/W IN V ...................................................................... SW Notes: -0.3V (-5V for <10ns) to 6.5V (10V for <10ns) 1) Exceeding these ratings may damage the device. All Other Pins ................................ -0.3V to 6.5 V 2) The maximum allowable power dissipation is a function of the (MAX), the junction-to- maximum junction temperature T J Junction Temperature ............................... 150 C ambient thermal resistance , and the ambient temperature JA Lead Temperature .................................... 260 C T . The maximum allowable continuous power dissipation at A (2) any ambient temperature is calculated by P (MAX) = (T D J Continuous Power Dissipation (T = +25C) A (MAX)-T )/ . Exceeding the maximum allowable power A JA ................................................ 1.14W dissipation will cause excessive die temperature, and the regulator will go into thermal shutdown. Internal thermal Storage Temperature ............... -65C to +150 C shutdown circuitry protects the device from permanent (3) damage. Recommended Operating Conditions 3) The device is not guaranteed to function outside of its operating conditions. Supply Voltage V ............................. 2.5V to 6V IN 4) Measured on JESD51-7, 4-layer PCB. Operating Junction Temp. (T ). -40C to +125C J MP2162 Rev. 1.03 www.MonolihicPower.com 2 6/8/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited. 2017 MPS. All Rights Reserved.