TVS Diode Array (SPA Diodes) Lightning Surge Protection- SP4020 Series RoHS GREEN Pb SP4020 Series 2.5pF, 30A Discrete TVS Diode Description The SP4020 components integrate low capacitance steering diodes with one or two avalanche breakdown diodes for unidirectional or bidirectional protection, respectively, to protect against ESD and lightning induced surge events. These devices can safely absorb up to 30A per IEC 61000-4-5, 2nd Edition (tp=8/20s) without performance degradation and a minimum 30kV ESD per IEC 61000-4-2 International Standard. The low loading capacitance and high surge capability make it ideal for protecting telecommunication ports such as Ethernet and other high speed data interfaces. Pinout Features ESD, IEC 61000-4-2, Small SOD323 package 30kV contact, 30kV air ts 0805 ffi ootprints 1 EFT, IEC 61000-4-4, 40A Moisture Sensitivity Level (5/50ns) (MSL-1) Lightning, 30A (8/20 as AEC-Q101 Qualified defined in IEC 61000-4-5 Halogen-Free, Lead-Free nd 2 edition) and RoHS-Compliant Low capacitance of 2.5pF ( V =0V) R Low leakage current of 0.1A at 3.3V Unidirectional and 2 Bidirectional configuration Functional Block Diagram Applications 1 1 10/100/1000 Ethernet Power Ports T1/E1/T3/E3 Computers and Peripherals USB 1.1/2.0 Instrumentation USB 3.0/3.1 Medical Equipment Additional Information 2 2 Unidirectional Bidirectional SP4020-01FTG SP4020-01FTG-C Datasheet Resources Samples Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/23/20 TVS Diode Array (SPA Diodes) Lightning Surge Protection- SP4020 Series Absolute Maximum Ratings Symbol Parameter Value Units I Peak Current (t =8/20s) 30 A PP p P Peak Pulse Power (t =8/20s) 750 W Pk p T Operating Temperature -40 to 125 C OP T Storage Temperature -55 to 150 C STOR CAUTION: Stresses above those listed in Absolute Maximum Ratings may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Electrical Characteristics (T =25C) OP Parameter Symbol Test Conditions Min Typ Max Units Breakdown Voltage V I =2uA 3.5 V BR R Reverse Standoff Voltage V I =1A 3.3 V RWM R Reverse Leakage Current I V =3.3V 0.1 0.5 A LEAK R I =1A, t =8/20s, Fwd 6.6 V PP p 1 Clamp Voltage V I =10A, t =8/20s, Fwd 14.2 V C PP p I =24A, t =8/20s, Fwd 21.8 V PP P 2 Dynamic Resistance R TLP, t =100ns, I/O to GND 0.40 DYN P IEC 61000-4-2 (Contact Discharge) 30 kV 1 ESD Withstand Voltage V ESD IEC 61000-4-2 (Air Discharge) 30 kV 1 Diode Capacitance C Reverse Bias=0V, f=1MHz 2.5 pF D Note: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) with 100ns width and 200ps rise time. Normalized Capacitance vs. Bias Voltage 1.4 SP4020-01FTG-C SP4020-01FTG 1.2 1.0 0.8 0.6 0.4 0.2 0.0 0.0 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 3.0 3.3 Bias Voltage (V) 2020 Littelfuse, Inc. Specifications are subject to change without notice. Revised: 03/23/20 Normalized Capacitance