X-On Electronics has gained recognition as a prominent supplier of WP59GYC Standard LEDs - Through Hole across the USA, India, Europe, Australia, and various other global locations. WP59GYC Standard LEDs - Through Hole are a product manufactured by Kingbright. We provide cost-effective solutions for Standard LEDs - Through Hole, ensuring timely deliveries around the world.
We are delighted to provide the WP59GYC from our Standard LEDs - Through Hole category, at competitive rates not only in the United States, Australia, and India, but also across Europe and beyond. A long established and extensive electronic component distribution network has enhanced our global reach and dependability, ensuring cost savings through prompt deliveries worldwide. Client satisfaction is at the heart of our business, where every component counts and every customer matters. Our technical service team is ready to assist you. From product selection to after-sales support, we strive to deliver a seamless and satisfying experience. Are you ready to experience the best in electronic component distribution? Contact X-ON Electronics today and discover why X-On are a preferred choice for the WP59GYC and other electronic components in the Standard LEDs - Through Hole category and beyond.
WP59GYC T-1 3/4 (5mm) Bi-Color Indicator Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Green source color devices are made with Gallium Phosphide Green Light Emitting Diode The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode FEATURES Uniform light output Low power consumption 3 leads with one common lead Long life-solid state reliability RoHS compliant APPLICATIONS Status indicator Illuminator Signage applications Decorative and entertainment lighting Commercial and residential architectural lighting Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01 ) unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice. SELECTION GUIDE 2 1 Iv (mcd) 20mA Viewing Angle Emitting Color Part Number Lens Type (Material) Min. Typ. 21/2 50 120 Green (GaP) WP59GYC Water Clear 20 40 80 Yellow (GaAsP/GaP) Notes: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity / luminous flux: +/-15%. 3. Luminous intensity value is traceable to CIE127-2007 standards. Page 1 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAF2652 / 1101005799 Rev No: V.9B Date: 07/13/2021 WP59GYC ELECTRICAL / OPTICAL CHARACTERISTICS at T =25C A Value Parameter Symbol Emitting Color Unit Typ. Max. Green 565 Wavelength at Peak Emission I = 20mA - nm F peak Yellow 590 Green 568 1 Dominant Wavelength I = 20mA - nm F dom Yellow 588 Spectral Bandwidth at 50% REL MAX Green 30 - nm I = 20mA Yellow 35 F Green 15 Capacitance C - pF Yellow 20 Green 2.2 2.5 2 Forward Voltage I = 20mA V V F F Yellow 2.1 2.5 Green 10 Reverse Current (V = 5V) I - A R R Yellow 10 Notes: 1. The dominant wavelength (d) above is the setup value of the sorting machine. (Tolerance d : 1nm. ) 2. Forward voltage: 0.1V. 3. Wavelength value is traceable to CIE127-2007 standards. 4. Excess driving current and / or operating temperature higher than recommended conditions may result in severe light degradation or premature failure. ABSOLUTE MAXIMUM RATINGS at T =25C A Value Parameter Symbol Unit Green Yellow Power Dissipation P 62.5 75 mW D Reverse Voltage V 5 5 V R Junction Temperature T 110 110 C j Operating Temperature T -40 To +85 C op Storage Temperature T -40 To +85 C stg DC Forward Current I 25 30 mA F 1 Peak Forward Current I 140 140 mA FM Electrostatic Discharge Threshold (HBM) 8000 8000 V - 2 Lead Solder Temperature 260C For 3 Seconds 3 Lead Solder Temperature 260C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. 4. Relative humidity levels maintained between 40% and 60% in production area are recommended to avoid the build-up of static electricity Ref JEDEC/JESD625-A and JEDEC/J-STD-033. Page 2 / 5 2021 Kingbright. All Rights Reserved. Spec No: DSAF2652 / 1101005799 Rev No: V.9B Date: 07/13/2021