TSic 506F/503F/501F Temperature Sensor IC For a fully calibrated and very accurate low power temperature measurement Benefits & Characteristics Fully calibrated Custom calibration and assembly available Outstanding accuracy of +/- 0.1 K Available with digital, analog and ratiometric output signal Very low power consumption Accuracy range of 40 K can be shifted (default: 5 C to 45 C) Excellent long-term stability Illustration Technical Data Operating temperature range:* -10 C to +60 C (+/- 3 C of measurement limits) Accuracy:* +/- 0.1 K in the range of 5 C to 45 C (other ranges upon request) Resolution:* 0.034 K Sampling rate:* 10 Hz + + Supply voltage: V = 3 V to 5.5 V, high precision operation in range V = 4.5 V to 5.5 V + Supply current: typ. 30 A at 25 C and V = 3.3 V for minimal self-heating Packaging:* SOP-8 or TO92 * Customer specific alternatives available Packaging pin assignment: Pin 1 Pin 2 Pin 3 Pin 4 SOP-8 V+, Supply voltage Signal Not used GND (3 V to 5.5V) TO92 GND Signal V+, Supply voltage (3 V to 5.5 V) 1/4TSic 506F/503F/501F Temperature Sensor IC For a fully calibrated and very accurate low power temperature measurement Absolute max. rating: Min Max + Supply voltage (V ): -0.3 V 6 V Voltages to analog I/O Pins (V , V ): -0.3 V V +0.3 V INA OUTA DDA Storage temperature range (T ): -20 C 80 C STOR Operating conditions: Min Typ Max + Supply voltage to GND (V ): 2.97 V 5 V 5.5 V + Supply current (I ) V = 3.3 V, RT: 25 A 30 A 60 A V+ Operating temperature range (T ): -10 C +60 C amb Output load capacitance (C ): 15 nF L + 1) External capacitance between V and GND (C ): 100 nF (recommended) V+ Output load Resistance between signal and GND 47 kOhm + (or V ): 2) Temperature accuracies: T1: 5 C to 45 C +/- 0.1 K T2: -10 C to 60 C +/- 0.2 K 1) + Recommended as close to TSic V and GND-Pins as possible 2) The sensor is calibrated at 5 V. The provided accuracy is applicable for a supply voltage between 4.5 V and 5.5 V. The accuracy is smaller with a supply voltage between 2.97 V and 4.5 V. For applications where the best accuracy at 3 V is TM requested, ask for a custom specific 3 V calibrated device. Other TSic products with custom specific calibrations are available upon request e.g. other temperature range for high accuracy. Accuracy at delivery the assembly method can influence the accuracy Order Information - SOP-8 Output signal Analog Analog ratiometric Digital, ZACWire protocol 501/503/506 TSic 501F SOP-8 TSic 503F SOP-8 TSic 506F SOP-8 Order code 030.00034 030.00054 030.00007 2/4