Connector Accessories TG70 Connector Strap Wrench With 3/8 Square Drive 6.500 (165.1) Approx 3/8 Square Drive, 3/8 (9.5) Square Drive for For Torque Wrench 600-004 Torque Wrench 600-004 3.000 (76.2) Dia. Max with 18-Inch Single Strap 3.000 (76.2) Dia. Max. See Note 2 3.000 (76.2) Dia. Max. with 18 Inch Single Strap 2.000 Dia. (50.8) Max. 2.000 Dia. (50.8) Max. with 12 Inch Single Strap with 12-Inch Single Strap See Notes 2, 4 and 5 Basic Torque Wrench APPLICATION NOTES Part Number (Omit for None) 1. These wrenches are made of the following materials: Wrench Handle - Aluminum Alloy/Nickel Plate. Wedge - Stainless Steel/Passivated. Strap - Impregnated Fabric. Straps are 1/2 inch (12.7) in width. TG70 - 1 - 18 2. Replacement straps are available. Specify part number G70515-xx for 12, 18, 24 or 36-inch strap. 24 and 36 inch for double wrap. 3. Metric dimensions (mm) are indicated in parentheses. Strap Length in Inches (See Notes2 and 4) 4. Double wrap as shown for heavy duty range. Lengths Available: 12, 18, 24 and 36-Inch Only 5. Not recommended for composite coupling nuts (use 600-091 or 600-157). Standard length is 12 Inches, Omit Dash Number for Standard VARIANCE CHART NOTES VARIANCE CHART 1. Recommended installation torque is approximately 80% of TG-70 Strap Wrench Used with Glenair Torque Wrenches MIL-C-85049 accessory thread Recommended Installation Torque strength values. Light/Medium Duty Heavy Duty 2. Heavy duty installation torque values may be difficult to attain Accessory 5 Inch Pounds 5 Inch Pounds with the TG70 Strap Wrench Shell Size TG70 Torque Part Torque TG70 Torque Part Torque the values shown in brackets 08/09 28 35 45 60 are the maximum attainable with the TG70 Strap Wrench using a 10/11 28 35 70 80 single wrap. 12/13 30 40 75 110 80 3. Glenair recommends using 600 14/15 30 40 75 120 80 series torque tools whenever 16/17 30 40 75 120 80 possible. When torque loading exceeds 75 inch pounds, or to 18/19 30 40 75 120 80 attain the heavy duty torque 20/21 75 80 95 140 100 values shown, a double wrap H 22/23 75 80 120* 140 strap provides suitable friction to achieve torque values. 24/25 75 80 120* 140 4. Glenair recomends that heavy 28 135* 150 duty torque values be directly 32 150* 150 read through the connector shell body with the use of 600-005 36 150* 150 connectors holding tools. * TG70 Not Recommended For Values of 120 Inch Lbs. or Greater. 2010 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com H-50 GLENAI R I NC. TG70X-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Spanners category: Click to view products by Glenair manufacturer: Other Similar products are found below : 74005 74008 DCH.91.101.PN 1406504-3 1406504-4 1406504-5 1406504-7 1725859-2 9965 999-16625-001 G70515-18 1055265-1 1055267-1 1-1406504-0 1055787-1 DCH.91.251.PA TG70-18 TG70 DPH.99.005.2K DCP.91.045.TN 1055512-1 1055276-1 R282303020 TA-0456 DCA.91.149.0TN TA-0436 TA-0398 TOL-222901 74 Z-0-0-193 64W022-001 294GB-5069-17-N 74 Z-0-0-2 523200-4 294GB- 5070-25-A 74 Z-0-0-79 294GB-5070-17-A 74 Z-0-0-321 TOL-171801 PR23350 1490262-2 9968 AC24VS 80117 DCN.91.149.0TK BT- A-6010CAGE R282340000 BT-BS-609WT BT-A-6000B R282303000 BT-BS-610R