INDEXINDEX
PCB
INDEXINDEX
Connectors
Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
RECEPt ACLES WIth PIN CoNt ACtS, RIGht ANGLE PCB tERMINA tIoN, 790-041P
Lightweight, rugged right angle headers feature gold-plated contacts for thru-hole
AA AA
printed circuit board termination. 790-041P connectors are free-standing (not for panel
mounting) and mate to 790-025S cable plugs. Contacts are permanently installed and
are sealed with epoxy. Shells are aluminum alloy. Threaded board mounting holes
and integral standoffs simplify installation. EMI shroud improves EMI performance.
Fluorosilicone face seal provides watertight interface. Available in 29 different contact
arrangements, these connectors feature size #23 signal contacts along with #16 and #12
BB BB
power contacts for up to 23 amps current rating.
HOW TO ORDER
Sample Part Number
CC CC
790-041P J-25P2 M P A
Shell Size -
Part Number Insert Arr. Shell Finish Hardware Option PC Tail Length
DD DD
See Table 1 for
790-041P M A
Available Insert
Header Receptacle Electroless Nickel .125 Inch (3.2 mm.)
Arrangements general purpose applications
with 90 PC Tail Pin
B
Contacts for Termination
MT
.250 inch (6.4 mm.)
to Backplanes or Flexible
Nickel-PTFE N
Circuits
1000 Hour Grey
No Hardware
maximum corrosion protection
EE EE
and durability
(non-reflective grey)
PC TAIL
ZNU LENGTH
Zinc-Nickel with Black
Chromate
P
tactical applications
FF FF
Female Jackpost
(non-reflective black)
Additional shell finishes are
listed on page C-9.
GG GG
SPECIFICATIONS MATERIALS AND FINISHES
Current Rating #23 5 AMPS, #16 13 A., #12 23 A. Shell Aluminum alloy
HH HH
Dielectric Withstanding #23 500 VAC RMS, #12 and #16
Copper alloy, 50 microinches gold
Contacts
1800 VAC RMS plated
Voltage
Insulation Resistance 5000 megohms minimum Insulator Liquid crystal polymer (LCP)
Operating Temperature -65 C. to +150 C. EMI Shroud Aluminum alloy
Shock 300 g. Interfacial Seal Flourosilicone rubber
Vibration 37 g. Jackposts 300 series stainless steel
Tray Thermoplastic
Encapsulant Epoxy
Dimensions in inches (millimeters) and are subject to change without notice.
2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
G-6
Rev. 04-July-2009INDEXINDEX
INDEXINDEX
Series 79 Micro-Crimp
Section G: Right Angle Printed Circuit Board Connectors
Table 1 Contact Arrangements CRoSS-SECtIoNAL vIEW oF 790-041P
Contact
Quantity
AA AA
INTERFACIAL SEAL
Layout #23#16#12 Face View
INSULATOR
PIN CONTACT
EPOXY .195 (4.95)
A-5 5
EMI GASKET
.195 (4.95)
.025 (0.64)
LCP INSULATOR
EMI GASKET
.025 (0.64)
CONTACT PIN
B-2P2 2 EMI SHROUD LCP INSULATOR
EPOXY
CONTACT PIN
EPOXY
EMI COVER
B-9 9
EMI COVER
BB BB
LCP TRAY
13
C-13
LCP TRAY
SHELL
INTERFACIAL SEAL
D-15 15
INTERFACIAL SEAL
.007
.007
(0.18)
3
D-3P3
(0.18)
CC D-7P2 5 2 CC
TABLE 2 HARDWARE OPTION
9 2
E-11P2
E-19 19
.195 (4.95)
.195 (4.95)
E-7P3 4 3
EMI GASKET
EMI GASKET
.025 (0.64)
.025 (0.64)
DD DD
INSULATOR
INSULATOR
F-15P2 13 2 EPOXY
EPOXY
F-23 23
INTERFACIAL SEAL INTERFACIAL SEAL
N P
5
F-5P5
No Mating Hardware Jackposts
EE G-33 33 EE
Connector is supplied with threaded holes. Shell Connector is supplied with non-removable
.007
sizes H and L have #6-32 threads, other sizes have stainless steel jackposts. Shell sizes H and L have .007
(0.18)
(0.18)
6 4
h-10P4
#4-40 threads. Thread depth is .150" (3.8). #4-40 UNC thread, other sizes have #2-56 thread.
h-29P7 22 7
H-36P2 34 2
FF FF
h-54P2 52 2
H-5P5 5
66
H-66
GG J-17P4 13 4 GG
23 2
J-25P2
J-33 33
7
J-7P7
HH HH
K-27P4 23 4
K-35P2 33 2
K-43 43
K-9P9 9
L-6P6 6
Dimensions in inches (millimeters) and are subject to change without notice.
2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
G-7
Rev. 04-July-2009
PCB
Connectors