SERIES 77 Lipped, 90 Angle Shrink Boots 770-007A Angled Long Tail Boot How to Order Lipped, right angle, long tail heat shrink boots provide mechanical and environmental protection from damage and debris . Long tail boots provide additional strain relief compared to standard length boots . These shrink boots fit most standard boot adapters for circular connectors . All adhesive lined and unlined shrink books are RoHS compliant Shr . ink boots are water-tight when equipped with factory installed or user-installed adhesive . Lipped boots lock into boot groove located on adapter . Choose boot size based on adapter diameter and cable diameter . How to Order Sample Part Number 770 -007 A 1 03 W1 -PP C Product Series 770 = Series 77 shrink boot Basic Number 007 = lipped, long tail boot Angular Function A = 90 Material See adhesive table for options Boot Size 03, 04, 06, 07 see dimensions table Adhesive Lined Omit for no adhesive see adhesive table for options Potting Port or Drain Hole PP = potting port DH = drain holes Omit for none Material and Adhesive Compatibility Hot Melt Adhesives High Performance Epoxy Adhesives Material Description W1 W2 W3 (TACOM approved) R U (Compound No.) High Temperature Standard Elastomeric Pre-Coat Two-Part -55C to 125C -55C to 70C -55C to 125C -75C to 150C -75C to 155C 1 High-Performance Semi-Rigid Elastomer (2025) Type U epoxy 2 Zero Halogen Semi-Rigid Polyolefin (2010) adhesive is 3 General Purpose Flexible Polyolefin (2040) compatible with all boot materials . 5 Viton Fluoroelastomer Blend (2050) Ordered separately, 6 High Performance Elastomer Alloy (2051) user-installed 7 Semi-Rigid Polyolefin (2071) (779-001) Or . der boot with no 8 Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive U . se Type U two-part epoxy adhesive lining . 9 Low Temp Flexible Polyolefin (2013) NOTES 1 . See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material . C-32 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice. 90 Boots Material CodeA03 A03 SERIES 77 Lipped, 90 Angle Shrink Boots 770-007A Angled Long Tail Boot Dimensions Lipped Right Angle Shrink Boots: Dimensions P0 C Cr Ce R Ar Ae C 90 - AS SUPPLIED 90 - RECOVERED Dimensions Boot Glenair US Part AS85049/141 R Ae Dia. Min Ce Dia. Min Ar Dia Max Cr Dia. Max PO 10% 2 Size Marking Ref Ref 03 A03 19 760 (19 . 3) 252 (64) . 512 (13 0) .083 (21) . 1 .772 (450) . 630 (16 0) 04 A04 20 1031 (26 . 2) . 299 (7 6) 752 (19 . 1) . 102 (2 . 6) . 2 .642 (67 .1) .709 (180) . 06 A06 21 1 .350 (34 .3) .382 (9 .7) 1024 (26 0) 122 (3 1) 3 .189 (81 .0) .752 (19 .1) 07 A07 22 1 .720 (43 .7) .449 (11 .4) 1 .343 (34 .1) .142 (3 .6) 4 .571 (116 .1) 831 (21 1) For materials Type 2, Type 3 and Type 9, dimension Ce is nominal Lipped Right Angle Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED C C LETTER C LETTER A INDICATES INDICATES ADAPTER CABLE END (CONNECTOR) END LETTER A INDICATES STRAIGHT BOOT BOOT SIZE CODE 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog C-33 U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice. A GLENAIR A A GLENAIR 90 Boots