Erg Spectra 015 & 017 21/10/03 4:35 pm Page 1 Spectra Low Profile Edge Mount 015 & 017 From only 3mm high. Up to 2 changeover or ON/OFF contacts. Front marking and easy to operate sliders. Patented 1 micron hard gold plated contacts. Spectra Low Profile Edge MountErg Spectra 015 & 017 21/10/03 4:35 pm Page 2 PCB drilling matrix 1mm holes 1mm holes pin centres pin centres 2.54 (0.1) 2.54 (0.1) 4.1 2.54 4.1 3.81 2.4mm dia 2.4mm 3.81 dia Changeover Contacts 12.5 Dual in line Single in line (centre common pin) (centre common pin) 5.1 10.5mm10.5mm 10.5mm 6.0 8 4.1 2.54 3 14.9 6 5.1 2 x s.p.d.t. 1 x d.p.d.t. 1 x s.p.d.t. 1 x s.p.d.t. 9.6 SCS2-015 SCS-1G2-015 SCS-1-017 SCLS-1-017 3 (Flush slider) 6.0 6 4.1 2.54 On/Off Contacts Single in line Single in line 10.5mm 9.6 3 9.6 6 2 x s.p.s.t. 1 x s.p.s.t. 1 x s.p.s.t. 5.1 8 SDS2-015 SDS-1-017 SDLS-1-017 3 (Flush slider) 6.0 6 4.1 Principal Electrical and Performance Data at 20C 70% R.H. Temperature: Operating range for continuous electrical use Contact Ratings: Non Switching: 100Vac, 5A. Switching: 1V to 100V, 1A to 1, 10A. and manual operation is restricted to 55C to +85C for standard products. Initial Contact Resistance: (at 10mV, 10mA max). Operating Force per pole: Typical: 4N. Typical: 10m. Insulation Resistance: (at 500 Vdc min.) 10,000M. Humidity: BS 2011 Test Ca: 56 days. Life: Mechanical wear out of the sliding actuator is usually Solderability: < 2 seconds to wet at 235C as per IEC 68 and BS 2011 Test T, solder bath method. We recommend that these observed after 10,000 operations. switches are post fitted after PCB cleaning has been carried out. Dielectric Strength: 1 minute: 500Vrms 50Hz. Resistance to soldering heat as per IEC 68 and BS 2011 10 Capacitance Between Open Contacts: < 1pf at 1KHz. seconds satisfactory at 260C when mounted on 1.5mrn PCB. This leaflet is believed to contain the best information available at the time of printing, but is Luton Road, Dunstable, Bedfordshire LU5 4LJ England subject to change without notice. Performance figures, where quoted, are actually estimates based on our experience or that of our customers or statutory authorities. In common with all Telephone: 01582 662241 Fax: 01582 600767 components reliability varies with many factors, and users are invited to contact us in appropriate cases so that where relevant information is available it may be considered by the user. All supplies are subject to the Companys standard conditions of sale which are available E-mail: info erg.co.uk