Bussmann
Fuseholders for GMT Type HLS, HLT, PCT
Indicating Fuses
Dimensional Data
Printed Circuit Board Application Note: Similar Body Dimensions
Shown With GMT Fuse Installed of All Holders Are Identical.
.31" Approx. .26"
.84"
(7.7mm) (6.5mm)
(21.3mm)
.60"
(15.3mm)
.60" 1"
(15.3mm) (25.4mm)
.13"
(3.2mm)
.1"
HLT
(25.4mm)
.19"
HLS (4.8mm)
.25"
(6.4mm)
HLS-F
.25"
.18"
(6.4mm)
(4.8mm)
HLS-C
.13"
(3.2mm)
HLT-F
.07"
.41" (1.8mm)
(10.4mm)
.25"
(6.4mm)
.84"
HLT-D
(21.3mm)
Wire Wrap Terminals
CATALOG SYMBOL: HLS, HLT, PCT .63"
.025" x .063"
(15.9mm)
(.64mm) (1.6mm)
FUSEHOLDERS FOR GMT TYPE INDICATING FUSES
.45"
(11.4mm)
ELECTRICAL RATING60V DC, 125V AC
Fuse Terminal
PCT-A
U.L. RECOGNIZED (GUIDE # IZLT2, FILE E14853) .11"
Alarm Terminal
(2.8mm)
15AMP (60V DC) PCT
Materials: .19"
(4.8mm)
Body: Thermosplastic, U.L. 94VO flammability rating
Terminals: Tin-plated bifrucated copper
.25"
x Spaces
(6.4mm)
Panel Mounting Data
Tolerance to be non-accumulative
.15"(3.8mm) Dia.
.16"(3.9mm) Dia.
For use with GMT Type Indicating Fuses
.41"
(10.4mm)
.86"
.27"
(21.8mm)
(6.7mm)
Multiple Fuseholders with bus bars 1.21"
(30.8mm)
Ordering InformationCatalog No.
.25"
(6.4mm)
.08" Dia. Holes
(2.1mm) (3 Holes Per Poles of Fuseholder)
Termination Location
Body Style
HLT
HLS (No flanges)
L R B
(Left only) (Right only) (Both ends)
No. of Poles 01 thru 25
(Min. of 2 poles required for bus bars)
Bus Bar Position
Type of bus bars used
B1*, B2, B3, P1
P2 P3 P4
B4, B5, SL** (Short Leads .135")
(Inside
(Outside (Outside (Outside
ML** (Medium Leads .250")
Both Sides) Both Sides) Right Only) Left Only)
** Not available with bus bars
B1 B2 B3
B4
B5
(Angle Bar Only)* Bar Only) Bar Only)
(Angle & Bars)
Bars)
* Angle Bar mounts on common or center terminals only.
Minimum of 4 Poles Required.
**SL Version is not available with bus bars.
The only controlled copy of this BIF document is the electronic read-only version located on the Bussmann Network Drive. All other copies of this BIF document are by definition uncontrolled.This bulletin is intended to
clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change design or construction of any
products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information contained in this bulletin. Once a product has been select-
ed, it should be tested by the user in all possible applications.
Form No. HLS, HLT, PCT
12-21-98
Page 1 of 1
BIF Doc #5010
SB98107 Rev. A