FZT968 Green 12V PNP HIGH CURRENT LOW SATURATION POWER TRANSISTOR IN SOT223 Features Mechanical Data BV > -12V Case: SOT223 CEO I = -6A High Continuous Collector Current Case Material: Molded Plastic. Green Molding Compound. C I = -20A Peak Pulse Current UL Flammability Rating 94V-0 CM Low Saturation Voltage V < -170mV -2A Moisture Sensitivity: Level 1 per J-STD-020 CE(sat) h Specified up to -10A for a High Gain Hold Up Terminals: Finish - Matte Tin Plated Leads, Solderable per FE Lead-Free Finish RoHS Compliant (Notes 1 & 2) MIL-STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.112 grams (Approximate) Qualified to AEC-Q101 Standards for High Reliability C SOT223 B E Top View Top View Device Symbol Pin-Out Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel FZT968TA AEC-Q101 FZT968 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT968 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -15 V CBO Collector-Emitter Voltage V -12 V CEO Emitter-Base Voltage -6 V V EBO Continuous Collector Current -6 A I C Peak Pulse Current -20 A I CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 6) Power Dissipation 24 W P D Linear derating factor mW /C 1.6 (Note 7) 12.8 (Note 6) R 42 JA Thermal Resistance, Junction to Ambient (Note 7) 78 C/W R JA Thermal Resistance Junction to Lead (Note 8) 8.8 R JL Operating and Storage Temperature Range T T -55 to +150 C J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in steady-state. 7. Same as note (6), except the device is mounted on 25mm x 25mm 1oz copper. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FZT968 2 of 7 October 2015 Diodes Incorporated Datasheet Number: DS33180 Rev. 4 - 2 www.diodes.com