FZT949 Green 30V PNP MEDIUM POWER TRANSISTOR IN SOT223 Features Mechanical Data BV > -30V Case: SOT223 CEO I = -5.5A High Continuous Collector Current C Case Material: Molded Plastic. Green Molding Compound. I = -20A Peak Pulse Current C UL Flammability Rating 94V-0 Low Saturation Voltage V < -140mV -1A CE(SAT) Moisture Sensitivity: Level 1 per J-STD-020 h Specified up to -20A for a High Gain Hold-Up FE Terminals: Finish - Matte Tin Plated Leads Solderable per MIL- Lead-Free Finish RoHS Compliant (Notes 1 & 2) STD-202, Method 208 Halogen and Antimony Free. Green Device (Note 3) Weight: 0.112 grams (Approximate) Qualified to AEC-Q101 Standards for High Reliability PPAP Capable (Note 4) C SOT223 B E Top View Top View Device Symbol Pin-Out Ordering Information (Notes 4 & 5) Product Compliance Marking Reel Size (inches) Tape Width (mm) Quantity per Reel FZT949TA AEC-Q101 FZT949 7 12 1,000 FZT949QTA Automotive FZT949 7 12 1,000 Notes: 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See FZT949 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V -50 V CBO Collector-Emitter Voltage -30 V V CEO Emitter-Base Voltage -7 V V EBO Continuous Collector Current -5.5 A I C Peak Pulse Current I -20 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit 3.0 (Note 6) Power Dissipation 24 W Linear Derating Factor P D mW/C 1.6 (Note 7) 12.8 (Note 6) 42 R JA Thermal Resistance, Junction to Ambient (Note 7) R 78 JA C/W Thermal Resistance Junction to Lead (Note 8) 8.8 R JL Operating and Storage Temperature Range -55 to +150 C T T J, STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 6. For a device mounted with the collector lead on 52mm x 52mm 2oz copper that is on a single sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 7. Same as Note 6, except mounted on 25mm x 25mm 1oz copper. 8. Thermal resistance from junction to solder-point (at the end of the collector lead). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. FZT949 2 of 7 April 2017 Diodes Incorporated Datasheet Number: DS38008 Rev. 2 - 2 www.diodes.com