A Product Line of Diodes Incorporated DXT2011P5 100V NPN MEDIUM POWER LOW SATURATION TRANSISTOR POWERDI 5 Features Mechanical Data BV > 100V Case: PowerDI5 CEO I = 6A High Continuous Collector Current Case Material: Molded Plastic, Green Molding Compound. C I = 10A Peak Collector Current UL Flammability Classification Rating 94V-0 CM P up to 3.2W Moisture Sensitivity: Level 1 per J-STD-020 D 43% smaller than SOT223 60% smaller than TO252 Terminals: Finish Matte Tin Plated Leads. Solderable per Maximum height just 1.1mm MIL-STD-202, Method 208 Totally Lead-Free & Fully RoHS compliant (Notes 1 & 2) Weight: 0.093 grams (approximate) Halogen and Antimony Free. Green Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Applications Motor Drive Voltage Regulator using Emitter-Follower DC-DC Converter Telecoms Power Management C POWERDI5 B E Bottom View Device Schematic Top View Pin-Out Top View Ordering Information (Note 4) Product Compliance Marking Reel size (inches) Tape width (mm) Quantity per reel DXT2011P5-13 AEC-Q101 DXT2011 13 16 5,000 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See A Product Line of Diodes Incorporated DXT2011P5 Absolute Maximum Ratings ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit Collector-Base Voltage V 200 V CBO Collector-Emitter Voltage 100 V V CEO Emitter-Base Voltage 7 V V EBO Continuous Collector Current 6 A I C Peak Pulse Current I 10 A CM Thermal Characteristics ( T = +25C, unless otherwise specified.) A Characteristic Symbol Value Unit (Note 5) 3.2 Power Dissipation (Note 6) P 1.7 W D (Note 7) 0.74 (Note 5) 39 Thermal Resistance, Junction to Ambient Air (Note 6) R 75 JA C/W (Note 7) 169 Thermal Resistance, Junction to Leads (Note 8) 5.6 R JL Operating and Storage Temperature Range -55 to +150 T , T C J STG ESD Ratings (Note 9) Characteristic Symbol Value Unit JEDEC Class Electrostatic Discharge - Human Body Model ESD HBM 4,000 V 3A Electrostatic Discharge - Machine Model ESD MM 400 V C Notes: 5. For a device mounted with the exposed collector pad on 50mm x 50mm 2oz copper that is on a single-sided 1.6mm FR4 PCB device is measured under still air conditions whilst operating in a steady-state. 6. Same as note (5), except mounted on 25mm x 25mm 1oz copper. 7. Same as note (5), except mounted on minimum recommended pad (MRP) layout. 8. Thermal resistance from junction to solder-point (on the exposed collector pad). 9. Refer to JEDEC specification JESD22-A114 and JESD22-A115. POWERDI is a registered trademark of Diodes Incorporated. 2 of 7 August 2014 DXT2011P5 Diodes Incorporated www.diodes.com Document number: DS32069 Rev. 4 - 2 ADVANCE INFORMATION