9000 SERIES/MOLDED SIP REED RELAYS
9000 Series High Performance SIP Reed Relays
e STh IP relay is the industry standard when high reliability and consistent perfor -
mance are desired in a compact package . The 9001 and 9002 are high performance
relays ideally suited for Automatic Test Equipment, Instrumentation, RF and Tele-
communications applications . The specicfi ation tables allow you to select the appropri -
ate relay for your application .
9000 Series Features
12 13
u
High Insulation Resistance - 10 minimum (10 t ypical)
u
High reliability, hermetically sealed contacts for long life
(tested up to 1 Billion Operations)
u
High dielectric strength available, consult factory
u
High speed switching compared to electromechanical relays
u
Molded thermoset body on integral lead frame design
u
Coaxial Shield for 50 impedance and switching of fast rise time
digital pulses - 9002 only
u
Optional Coil Suppression Diode - protects coil drive circuits
u
UL File #E67117, CSA File #028537 - Contact factory for details
u
RoHS compliant
DIMENSIONS
in Inches (Millimeters)
Model 9001 Model 9002
.760 Max (19.3)
.200 Max (5.08)
.760 Max (19.3)
.780 Max.
.200 Max (5.08) .780 Max. .222 Max. (5.64) w/Shell
(19.8) w/Shell
(19.8) w/Shell
.222 Max. (5.64) w/Shell
.133
(3.4) Max.
.020 .020
.300 Max (7.6)
.133
(0.5) (0.5) .300 Max (7.6)
.320 Max. (8.1) w/Shell
(3.4) Max.
.320 Max. (8.1) w/Shell
.020 REF.
.100 (Typ.)
.010
(0.51)
(2.54)
.200 (Typ.)
(0.25)
.200 (Typ.) .010
(5.08)
(5.08) (0.25)
o
30
Alternate Package
.760 Max (19.3)
.200 Max (5.08)
.780 Max.
.222 Max. (5.64) w/Shell
(19.8) w/Shell
.020
.300 Max (7.6)
(0.5)
.320 Max. (8.1) w/Shell
.133
.020 REF.
(3.4) Max.
.200 (Typ.) Ordering Information
(0.51)
.010
(5.08)
(0.25)
90XX-XX-XX
Part Number
Model Number
General Options
9001 9002 0 = No Diode
2
1 = Diode
Coil Voltage
05=5 volts
NOTE
Magnetic Shield Option
12=12 volts
u
For RF Graph Performance, see RF Graphs section
0 = No Shield
of the Reed Relay Technical & Application Information
1 = Shield
tel: (401) 943.2686 | fax: (401) 942.0920
32 | page2 2
9001 9002
MODEL NUMBER
Parameters Test Conditions Units 4 Pin SIP 6 Pin SIP
COIL SPECS.
Nom. Coil Voltage VDC 5 12 5 12
Max. Coil Voltage VDC 6.5 15.0 6.5 15.0
Coil Resistance +/- 10%, 25 C 500 1000 350 750
Operate Voltage Must Operate by VDC - Max. 3.75 9.0 3.75 9.0
Release Voltage Must Release by VDC - Min. 0.4 1.0 0.4 1.0
CONTACT RATINGS
Switching Voltage Max DC/Peak AC Resist. Volts 200 200
Switching Current Max DC/Peak AC Resist. Amps 0.5 0.5
Carry Current Max DC/Peak AC Resist. Amps 1.5 1.5
Contact Rating Max DC/Peak AC Resist. Watts 10 10
1 6
Life Expectancy-Typical Signal Level 1.0V, 10mA x 10 Ops. 1000 1000
Static Contact
50mV, 10mA 0.150 0.150
Resistance (max. init.)
Dynamic Contact 0.5V, 50mA
0.200 0.200
Resistance (max. init.) at 100 Hz, 1.5 msec
RELAY SPECIFICATIONS
Insulation Resistance Between all Isolated Pins
12 12
10 10
(minimum) at 100V, 25C, 40% RH
No Shield pF 0.7 -
Capacitance - Typical
Shield Floating pF - 0.8
Across Open Contacts
Shield Guarding pF - 0.1
No Shield pF 1.4 -
Open Contact to Coil Shield Floating pF - 1.4
Shield Guarding pF - 0.5
Contact to Shield Contacts Open, Shield Floating pF - 1.4
Between Contacts VDC/peak AC 300 300
Dielectric Strength
Contacts to Coil VDC/peak AC - 1500
(minimum)
Contacts/Shield to Coil VDC/peak AC 1500 1500
Operate Time - including At Nominal Coil Voltage,
msec. 0.35 0.35
bounce - Typical 30 Hz Square Wave
Release Time - Typical msec. 0.1 0.1
1 1
Top View:
5
Dot stamped on relay refers to pin #1
2 2
Grid = .1x.1 (2.54mm x 2.54mm)
3 3
6
4 4
Notes:
1
Consult factory for life expectancy at other switching loads . Resistance >0 . 5
defines end of life or failure to open .
2
Optional diode is connected to pin #2(+) and pin #3(-) . Correct coil polarity must be observed .
Environmental Ratings:
+ +
Storage Temp: -35C to 100C; Operating Temp: -20C to 85C; Solder Temp: 270C max; 10 sec . max
All electrical parameters measured at 25C unless otherwise specified .
Vibration: 20 Gs to 2000 Hz; Shock: 50 Gs
For most recent data visit www.cotorelay.com COTO TECHNOLOGY, INC. page | 33