Type AVGA 40 C to +105 C High Capacitance SMT Aluminum Electrolytic Capacitors For Filtering, Bypassing and Power Supply Decoupling with High Capacitance Requirements Type AVGA Capacitors are rated for 2000 hours at 105 C and up to 63 Vdc. They are ideal for high density PC board packaging. The Type AVGA offers a low in-place-cost for a high quality performer. The vertical cylindrical cases facilitate automatic mounting and reflow soldering into the same footprint of like-rated tantalum capacitors except without the need for voltage derating. Type AVGA is RoHS compliant. Highlights +105 C, Up to 2000 Hours Load Life Capacitance Range: 0.1 F to 4700 F Voltage Range: 6.3 Vdc to 63 Vdc Specifications O p erating Temp erature: 40 C to +105 C Rated Voltage: 6.3, 10, 16, 25, 35, 50, 63 Vdc Capacitance: 0.1F to 4700 F Capacitance Tolerance: 20% 120 Hz and +20 C Leakage Current (at 20 C): 4 10 I = 0.01 CV or 3 A, whichever is greater, after 2 minutes at +20 C 6.3 63 V 12.5 ~ 16 I = 0.03 CV or 4 A, whichever is greater, after 2 minutes at +20 C I = leakage current C = rated capacitance in F V = rated DC Working voltage in V Dissipation Factor: Rated Voltage 6.3 10 16 25 35 50 63 ) (Tan d at 120 Hz, 20 C 4 ~ 10 0.45 0.35 0.28 0.18 0.16 0.14 0.12 12.5 ~ 16 0.4 0.38 0.34 0.26 0.22 0.18 0.14 When the capacitance exceeds 1000 F, .02 shall be added for every 1000 F increase Low Temperature Characteristic (at 120 Hz): Rated Voltage 6.3 10 16 25 35 50 63 Z(25 C) 4 ~ 10 4 3 2 2 2 2 2 /Z(+20 C) 12.5 ~ 16 5 4 3 2 2 2 2 Impedance Ratio Z(40 C) 4 ~ 10 12 8 6 4 3 3 3 /Z(+20 C) 12.5 ~ 16 10 8 6 4 3 3 3 Impedance ratio shall not exceed the values given in the table above. Load Life Test: Test Time 2,000 Hours 4 ~ 6.3 : Within 25 % of initial value Capacitance Change 8 ~ 16 : Within 20 % of initial value Dissipation Factor < 200% of specified value Leakage Current Within specified value * The above specifications shall be satisfied when the capacitors are restored to 20 C after the rated voltage is applied for 2,000 hrs at 105 C Shelf LifeTest: Test time: 1000 hours other items are the same as those for life test. Complies with the EU Directive 2002/95/EC requirement restricting the use of Lead (Pb), Mercury (Hg), Cadmium (Cd), Hexavalent chromium (Cr(VI)), PolyBrominated Biphenyls (PBB) and PolyBrominated Diphenyl Ethers (PBDE). CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.comType AVGA 40 C to +105 C High Capacitance SMT Aluminum Electrolytic Capacitors Outline Drawings, Case Code & Dimensions Table - + Case D L A B C W P 0.2 Fig. Code (mm) (mm) (mm) (mm) (mm) (mm) (mm) No. B 4.0 5.7 0.3 4.3 4.3 2.0 0.5 to 0.8 1.0 1 C 5.0 5.7 0.3 5.3 5.3 2.3 0.5 to 0.8 1.5 1 D 6.3 5.7 0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 X 6.3 7.7 0.3 6.6 6.6 2.7 0.5 to 0.8 2.0 1 F 8.0 10 0.5 8.4 8.4 3.0 0.7 to 1.1 3.1 1 G 10.0 10 0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 Q 10.0 10.3 0.5 10.4 10.4 3.3 0.7 to 1.1 4.7 1 - H 12.5 13.5 0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 + L 12.5 16 0.5 12.8 12.8 4.9 1.1 to 1.4 4.2 2 P 16.0 16.5 0.5 16.3 16.3 5.8 1.1 to 1.4 6.0 2 Part Numbering System AVGA 227 M 25 F 24T F Type Capacitance Capacitance Voltage Code Case Packaging Code RoHs Tolerance Code Compliant AVGA 104 = .1 F M = 20% 06 = 6.3 Vdc See 24 = Carrier tap 475 = 4.7 F 10 = 10 Vdc Table Width (mm) 106 = 10.0 F 16 = 16 Vdc T = Tape & Reel 227 = 220 F 25 = 25 Vdc Y = Tray Pack (available for H,L, 478 = 4700 F 35 = 35 Vdc & P case codes) 50 = 50 Vdc 63 = 63 Vdc CDE Cornell Dubilier 1605 E. Rodney French Blvd. New Bedford, MA 02744 Phone: (508)996-8564 Fax: (508)996-3830 www.cde.com