CFM100M SERIES 100W MEDICAL&ITE OPEN FRAME AC-DC MODULES WITH PFC Features * Universal Input Range 90 ~ 264VAC * Medical and ITE Safeties * 3x 5 Compact Size * Less than 1 U high * Industry Standard Pin Out * Active PFC Meets EN61000-3-2 * High Efficiency up to 92% * Meets CISPR/FCC Class B * Remote Voltage Sense * Over Voltage Protection * Continuous Short Circuit Protection * No load Power Consumption<0.5W * Meets 2MOPP RIPPLE & VOLTAGE LINE LOAD % EFF. OUTPUT MAX. MIN. VOLTAGE MODEL NOISE ACCURACY REGULATION REGULATION (Typ.) VOLTAGE LOAD LOAD ADJ. RANGE NOTE 1 NOTE 2 NOTE 3 NOTE 4 NOTE 5 CFM100M050 5V 20A 0A 2% 4.75~5.25 1% 0.5% 1% 83% CFM100M075 7.5V 13.4A 0A 2% 7.13~7.88 1% 0.5% 1% 87% CFM100M090 9V 11.2A 0A 1% 8.55~9.45 1% 0.5% 1% 89% CFM100M120 12V 8.4A 0A 1% 11.4~12.6 1% 0.5% 1% 89% CFM100M150 15V 6.7A 0A 1% 14.25~15.75 1% 0.5% 1% 90% CFM100M180 18V 5.6A 0A 1% 17.1~18.9 1% 0.5% 1% 90% CFM100M240 24V 4.2A 0A 1% 22.8~25.2 1% 0.5% 1% 91% CFM100M280 28V 3.6A 0A 1% 26.6~29.4 1% 0.5% 1% 90% CFM100M360 36V 2.8A 0A 1% 34.2~37.8 1% 0.5% 1% 91% CFM100M480 48V 2.1A 0A 1% 45.6~50.4 1% 0.5% 1% 92% Specifications are subject to change without notice. 1 Specifications CFM100M Series Derating Curve INPUT SPECIFICATIONS: CFM100M Voltage ....................................................... 90~264Vac Frequency ...... 47 to 63Hz 100% Inrush Current .................... 80A max. 240Vac 75% Leakage Current .... 300uA max. 20LFM(Natural Convection) 50% OUTPUT SPECIFICATIONS: 100LFM Holdup Time ... 16ms typ. 25% Short Circuit Protection .. Hiccup mode(Auto Recovery) Adjustment Range on Vout. 5% 0% Over Voltage Protection Recycle AC input to restart -20 -10 0 10 20 30 40 50 60 70 Temperature Coefficient .............................. 0.05%/ Ambient Temperature(C) GENERAL SPECIFICATIONS: Isolation Input to output = 5,656VDC NOTE: Operating Temperature ........................... -20~ 70 (see Derating Curve) 1. CFM100M050:Add a 0.1uF ceramic capacitor and 220uF E.L. capacitor to output for Ripple & Noise measuring 20MHz BW. Storage Temperature ................. -20 ~ 85 Humidity ...................................................... 93% RH max. Non condensing Other Model: Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to Cooling . Natural Convection output for Ripple & Noise measuring 20MHz BW. Switching Frequency ............................. 90KHz Typical 2. Voltage accuracy is set at 100% rated load and 25 Ta. 3. Line regulation is measured from High Line to Low Line with full load. MTBF . MIL-HDBK-217F, GB, 25 /115VAC 200K hrs min. Altitude ....... 3000m 4. Load regulation is measured from Full to 10% load. Dimensions .. 5.000x3.000x1.050inches (127.00x76.20x26.67mm) 5. Typical efficiency at 230VAC and full load at 25. Weight ... 270g (0.6Pounds) 6. Standard input and output connectors wafer with LONG CHU P3060 series and mate with MOLEX housing 5195 series or equivalent. SAFETY AND EMC: Emission and Immunity . EN55024, EN61000-6-1, EN61204-3 7. DC output pin 1, 2, 3, 4: Vout (-), DC output pin 5, 6, 7, 8: Vout (+). EN60601-1-2, EN61000-3-2 Class A, B, C, D, EN61000-3-3 EN55011 Class B, EN55022 Class B, FCC Part15 Class B Safety . IEC60601-1:2005, EN60601-1:2006, ANSI/AAMI ES60601-1:2005 IEC60950-1, EN60950-1, UL60950-1 CFM100M Series All Dimensions are in inches mm Tolerance: Inches:x.xxx= 0.02 Millimeters:x.xx= 0.5 5.000(127.00) 4.546(115.48) 0.224(5.70) LED 1 2 3 4 5 6 7 8 RS- ACL RS+ ACN VR Typical at 25C, nominal line and 75% load, unless otherwise Specified 2 Rate Load (%) 0.118(3.00)max 0.063(1.60) 1.050(26.67)max 0.224(5.70) 2.555(64.90) 3.000(76.20)