LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 85 KMH P292 SMESeries 105 Endurance with ripple current : 2,000 hours at 85 RoHS Compliant SME SPECIFICATIONS Items Characteristics Category -40 to +85 (10 to 100Vdc) Temperature Range Rated Voltage Range 10 to 100Vdc Capacitance Tolerance 20% (M) (at 20 , 120Hz) Leakage Current I=0.02CV or 5mA, whichever is smaller. Where, I : Max. leakage current (A), C : Nominal capacitance (F), V : Rated voltage (V) (at 20 after 5 minutes) Dissipation Factor Shall not exceed the values shown in the STANDARD RATINGS (tan ) (at 20, 120Hz) Low Temperature Capacitance change C(-25 )/C(+20)0.7 Characteristics (at 120Hz) Insulation Resistance When measured between the terminals that are connected to each other and to the mounting clamp on the insulating sleeve covering the case by using an insulation resistance meter of 500Vdc, the insulation resistance shall not be less than 100M. Insulation When a voltage of 2,000Vac is applied for 1 minute between the terminals that are connected to each other and to the mounting clamp Withstanding Voltage on the insulating sleeve covering the case, there shall not be electrical damage. Endurance The following specications shall be satised when the capacitors are restored to 20 after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 2,000 hours at 85 . Capacitance change 20% of the initial value D.F. (tan ) 200% of the initial specied value Leakage current The initial specied value Shelf Life The following specications shall be satised when the capacitors are restored to 20 after exposing them for 500 hours at 85 without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change 20% of the initial value D.F. (tan) 150% of the initial specied value Leakage current The initial specied value DIMENSIONS (Screw-Mount) mm Terminal Code : LG Mounting Clamp Code : B Mounting Clamp Code : C 360 A1 3 W1 Sleeve (Pb-free PVC : Black) 455 6 305 Vent 8 L+4max. G1 J Plastic disk D A B W H F D E K J F 35 58.0 44.0 48.0 3.5 12.7 50 32.5 37.0 14.0 22.4 50 78.0 64.0 68.0 4.5 22.4 63.5 38.1 43.5 14.0 28.0 35 to 63.5 : G=6 63.5 90.0 76.0 80.0 4.5 28.0 76.2 44.5 50.0 14.0 31.5 76.2 & 89 : G=5 76.2 104.5 90.0 93.5 4.5 31.5 89 50.8 56.5 16.0 31.5 <Screw specifcations> Plus hexagon-headed screw :M50.810 Maximum screw tightening torque :3.23Nm * The screw and the mounting clamp are separately supplied and not attached to the product. PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E SME AAAAAA LG NN AAAAAA M AAAAAA M Supplement code Size code Capacitance tolerance code Capacitance code (ex. 6,800F:682, 39,000F:393) Mounting clamp code (N, B, C) Terminal code Voltage code (ex. 10V:100, 100V:101) Series code Category Please refer toProduct code guide (screw-mount terminal type Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 288 CAT. No. E1001O F1 D+1.8max. H B1 K1 E1 4.5LARGE CAPACITANCE ALUMINUM ELECTROLYTIC CAPACITORS Standard screw terminals, 85 SMESeries STANDARD RATINGS Rated ripple Rated ripple WV Cap Case size current WV Cap Case size current tan Part No. tan Part No. (Vdc) (F) D L(mm) (Arms/ (Vdc) (F) D L(mm) (Arms/ 85 , 120Hz) 85 , 120Hz) 39,000 35 50 0.60 4.70 ESME100LGB393MA50M 10,000 35 50 0.25 4.10 ESME500LGB103MA50M 82,000 35 80 0.60 7.40 ESME100LGB823MA80M 18,000 35 80 0.25 5.20 ESME500LGB183MA80M 100,000 35 100 0.70 8.00 ESME100LGB104MAA0M 22,000 35 100 0.30 5.90 ESME500LGB223MAA0M 120,000 35 120 0.70 9.40 ESME100LGB124MAC0M 27,000 35 120 0.35 6.60 ESME500LGB273MAC0M 150,000 50 80 0.90 9.80 ESME100LGC154MC80M 39,000 50 80 0.40 7.40 ESME500LGC393MC80M 10 220,000 50 100 1.00 12.1 ESME100LGC224MCA0M 56,000 50 100 0.40 9.80 ESME500LGC563MCA0M 50 270,000 50 120 1.20 13.6 ESME100LGC274MCC0M 68,000 50 120 0.45 11.1 ESME500LGC683MCC0M 390,000 63.5 100 1.50 15.3 ESME100LGC394MDA0M 82,000 63.5 100 0.50 12.2 ESME500LGC823MDA0M 470,000 63.5 120 2.00 16.0 ESME100LGC474MDC0M 120,000 63.5 120 0.50 16.0 ESME500LGC124MDC0M 560,000 76.2 100 2.50 17.3 ESME100LGC564MEA0M 150,000 76.2 120 0.60 18.1 ESME500LGC154MEC0M 680,000 76.2 120 3.00 18.7 ESME100LGC684MEC0M 180,000 76.2 140 0.70 19.5 ESME500LGC184MEE0M 27,000 35 50 0.45 4.20 ESME160LGB273MA50M 270,000 89 140 0.80 24.6 ESME500LGC274MFE0M 56,000 35 80 0.60 6.50 ESME160LGB563MA80M 5,600 35 50 0.20 3.00 ESME630LGB562MA50M 82,000 35 100 0.70 8.00 ESME160LGB823MAA0M 10,000 35 80 0.25 4.00 ESME630LGB103MA80M 100,000 35 120 0.70 9.60 ESME160LGB104MAC0M 15,000 35 100 0.25 5.30 ESME630LGB153MAA0M 120,000 50 80 0.80 9.60 ESME160LGC124MC80M 18,000 35 120 0.25 6.20 ESME630LGB183MAC0M 150,000 50 100 0.90 11.2 ESME160LGC154MCA0M 22,000 50 80 0.30 6.50 ESME630LGC223MC80M 16 220,000 50 120 1.00 14.2 ESME160LGC224MCC0M 33,000 50 100 0.35 8.10 ESME630LGC333MCA0M 63 270,000 63.5 100 1.20 15.3 ESME160LGC274MDA0M 39,000 50 120 0.35 9.60 ESME630LGC393MCC0M 330,000 63.5 120 1.30 17.1 ESME160LGC334MDC0M 47,000 63.5 100 0.40 10.2 ESME630LGC473MDA0M 390,000 76.2 100 1.60 18.0 ESME160LGC394MEA0M 68,000 63.5 120 0.40 13.3 ESME630LGC683MDC0M 470,000 76.2 120 1.80 19.3 ESME160LGC474MEC0M 100,000 76.2 120 0.45 17.1 ESME630LGC104MEC0M 560,000 76.2 140 2.00 20.7 ESME160LGC564MEE0M 120,000 76.2 140 0.50 19.0 ESME630LGC124MEE0M 18,000 35 50 0.35 4.00 ESME250LGB183MA50M 150,000 89 140 0.55 22.0 ESME630LGC154MFE0M 39,000 35 80 0.40 6.20 ESME250LGB393MA80M 3,300 35 50 0.15 2.50 ESME800LGB332MA50M 47,000 35 100 0.40 7.40 ESME250LGB473MAA0M 6,800 35 80 0.20 3.70 ESME800LGB682MA80M 56,000 35 120 0.45 8.30 ESME250LGB563MAC0M 10,000 35 100 0.20 4.90 ESME800LGB103MAA0M 82,000 50 80 0.50 9.70 ESME250LGC823MC80M 12,000 35 120 0.20 5.40 ESME800LGB123MAC0M 100,000 50 100 0.60 10.8 ESME250LGC104MCA0M 15,000 50 80 0.25 6.00 ESME800LGC153MC80M 25 120,000 50 120 0.60 12.8 ESME250LGC124MCC0M 22,000 50 100 0.30 7.10 ESME800LGC223MCA0M 80 180,000 63.5 100 0.75 14.7 ESME250LGC184MDA0M 27,000 50 120 0.30 8.60 ESME800LGC273MCC0M 220,000 63.5 120 0.80 16.8 ESME250LGC224MDC0M 33,000 63.5 100 0.35 9.30 ESME800LGC333MDA0M 270,000 76.2 100 0.90 18.3 ESME250LGC274MEA0M 47,000 63.5 120 0.35 12.0 ESME800LGC473MDC0M 330,000 76.2 120 1.00 20.7 ESME250LGC334MEC0M 68,000 76.2 120 0.35 15.4 ESME800LGC683MEC0M 390,000 76.2 140 1.20 22.1 ESME250LGC394MEE0M 82,000 76.2 140 0.35 18.1 ESME800LGC823MEE0M 560,000 89 140 1.50 25.8 ESME250LGC564MFE0M 100,000 89 140 0.40 21.0 ESME800LGC104MFE0M 15,000 35 50 0.30 3.90 ESME350LGB153MA50M 2,200 35 50 0.10 2.50 ESME101LGB222MA50M 33,000 35 80 0.40 6.00 ESME350LGB333MA80M 4,700 35 80 0.15 3.40 ESME101LGB472MA80M 39,000 35 100 0.40 7.00 ESME350LGB393MAA0M 6,800 35 100 0.15 4.20 ESME101LGB682MAA0M 47,000 35 120 0.45 8.00 ESME350LGB473MAC0M 8,200 35 120 0.15 5.00 ESME101LGB822MAC0M 68,000 50 80 0.50 9.00 ESME350LGC683MC80M 10,000 50 80 0.20 5.20 ESME101LGC103MC80M 82,000 50 100 0.55 10.3 ESME350LGC823MCA0M 18,000 50 120 0.20 8.10 ESME101LGC183MCC0M 100 35 120,000 50 120 0.60 12.8 ESME350LGC124MCC0M 22,000 63.5 100 0.25 8.60 ESME101LGC223MDA0M 150,000 63.5 100 0.70 14.0 ESME350LGC154MDA0M 27,000 63.5 120 0.25 10.3 ESME101LGC273MDC0M 180,000 63.5 120 0.70 16.6 ESME350LGC184MDC0M 33,000 76.2 100 0.25 11.1 ESME101LGC333MEA0M 220,000 76.2 100 0.75 17.3 ESME350LGC224MEA0M 39,000 76.2 120 0.25 12.4 ESME101LGC393MEC0M 270,000 76.2 120 0.80 19.8 ESME350LGC274MEC0M 47,000 76.2 140 0.25 14.3 ESME101LGC473MEE0M 330,000 76.2 140 0.90 22.5 ESME350LGC334MEE0M 68,000 89 140 0.30 18.0 ESME101LGC683MFE0M 470,000 89 140 1.00 28.3 ESME350LGC474MFE0M RATED RIPPLE CURRENT MULTIPLIERS Frequency Multipliers Frequency (Hz) Rated voltage Case diameter (Vdc) (mm) 50 120 300 1k 10k 50k 10 to 50 35 to 89 0.95 1.00 1.03 1.05 1.09 1.12 35 0.90 1.00 1.06 1.10 1.18 1.22 63 & 80 50 to 89 0.95 1.00 1.03 1.05 1.09 1.12 35 0.82 1.00 1.12 1.22 1.30 1.33 100 50 0.90 1.00 1.06 1.10 1.18 1.22 63.5 to 89 0.95 1.00 1.03 1.05 1.09 1.12 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5 rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 289 CAT. No. E1001O