Slim Industrial Relay Type RSLM Electromechanical Slim size (width 5mm) High breakdown voltage 4kV (between coil and contacts) Surge voltage up to 6kV (between coil and contacts) Conforms to VDE 0700, 0631 reinforced insulation High sensitivity: Approx. 170mW RoHS compliant Dimensions: 28.0 x 5.0 x 15.0mm Changeover contact (SPDT) or Normally Open (SPST) RSLM contact configuration option Product Description The RSLM is a very slim current of 6A. It is available The RSLM is suitable for use installation of the RSLM electromechanical relay that with 1 changeover contact with PLCs, valves actuation relays on DIN rail, while the can switch resistive loads (SPDT) or 1 normally open or solenoids. The DIN rail ZRLP enable easy installation with a maximum switching (SPST) contact. socket (ZRLS) facilitate the on PCB. Ordering Key Approvals RSL M 001 024 Model Type (Electro-mechanical) Contact configuration Nominal coil voltage Type Selection Contact Configuration Contact Rating Contact Code 1 change over contact (SPDT - 1) 6A, 250VAC/30VDC 001 1 normally open contact (SPST - 1) 6A, 250VAC/30VDC 100 Selection Guide Part Number Max. switching current Nominal Voltage Contact Configuration RSLM100012 SPST 12VDC RSLM001012 SPDT RSLM100024 SPST 24VDC RSLM001024 SPDT 6A RSLM100048 SPST 48VDC RSLM001048 SPDT RSLM100060 SPST 60VDC RSLM001060 SPDT Coil Characteristics DC +23C Nominal Pick-up Drop-out Coil 1) Max Voltage VDC Voltage (VDC) Voltage VDC max Voltage VDC min. Resistance 12 9.0 0.60 18 848 x (110%) 24 18.0 1.20 36 3390 x (115%) 48 36.0 2.40 72 10600 x (115%) 60 45.0 3.00 90 16600 x (115%) Notes: 1) Max voltage refers to the max voltage which the relay coil could endure for a short period of time. 2) For products with a rated voltage of 48V, measures should be taken to prevent the coil overvoltage in order to protect the coil and the application (eg. connect diodes in parallel). 3) Do not install RSLM001 types on either of the smallest sides or facing downward. 1 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please refer to our sales network. 13/10/2017Slim Industrial Relay Type RSLM Monostable Contact Characteristics Contact arrangement 1 Form A (SPST - Normally Electrical endurance 4 Open) 001 (SPST type) 6 x 10 OPS (6A 250VAC/ 1 Form C (SPDT - Changeover) 30VDC Resistive load, Contact resistance 100m max. ( 1A 6VDC) AgNi, 85C, 1s on 9s off 4 Gold plated: 30m max. 100 (SPDT type) 3 x 10 OPS (NO, 6A 250VAC / ( 1A 6VDC) 30VDC, Resistive load AgNi, 4 Contact material AgNi 85C, 1s on 9s off) 1 x 10 Contact rating (Resistive Load) 6A 250VAC / 30VDC OPS (NC, 6A 250VAC/30VDC, Max. switching voltage 400VAC / 125VDC Resistive load, AgNi, 85C, Max. switching current 6A 1s on 9s off) Max. switching power 1500VA / 180W Coil power 7 Mechanical endurance 1 x 10 OPS 24VDC 170mW Approx. 48VDC, 60VDC 210mW Approx. General Data Vibration resistance 10Hz to 55Hz 1mm DA Insulation resistance 1000M ( 500VDC) Humidity 5% to 85% RH Dielectric strength Between coil & contacts 4000VAC 1 min Ambient temperature -40C to 85C Between open contacts 1000VAC 1 min Terminal connections PCB Operate time 8ms max. (at nominal voltage) Unit weight Approx. 5g Construction Plastic sealed, flux proofed Release time 4ms max. (at nominal voltage) Shock resistance 2 Functional 49m/s 2 Destructive 980m/s Notes: 1) The data shown above is standard 2) Please find coil temperature curve in the characteristic curves below 3) UL insulation system: Class A Dimensions RSLM100 RSLM001 2 Specifications are subject to change without notice. Pictures are just an example. For special features and/or customization, please refer to our sales network. 13/10/2017