S Series
Slide Switches
Features/Benefits Typical Applications
6 to 15 AMPS Portable tools
Enclosed housing Small appliances
PC and Snap-in panel mounting Floor care products
Reversing option
RoHS compliant
Models Available
Specifications Materials
CONTACT RATING: Q contact material (S1XX, S2XX Models): HOUSING: 6/6 nylon (UL94V-2), black.
I
6 AMPS @ 125 V AC; 6 AMPS @ 250 V AC; 1 AMP @
TOP PLATE: 6/6 nylon (UL94V-2), black.
125 V DC (UL/CSA). (S5XX, S6XX Models): 12 AMPS @
ACTUATOR: 6/6 nylon (UL94V-2), black (standard).
125 V AC; 6 AMPS @ 250 V AC; 1 AMP @ 125 V DC (UL/CSA).
CONTACTS: Q contact material: Copper, silver plated. See page
(S7XX, S8XX Models): 15 AMPS @ 125 V AC; 6AMPS @
I-32 for additional contact materials.
250 V AC (UL/CSA). See page I-32 for additional ratings.
TERMINALS: Q contact material: Copper, silver plated. See page
ELECTRICAL LIFE: 10,000 make-and-break cycles at full load.
I-32 for additional contact materials.
CONTACT RESISTANCE: Below 10 m typ. initial
CONTACT SPRING: Music wire or stainless steel.
@ 2-4 V DC, 100 mA, for both silver and gold plated contacts.
TERMINAL SEAL: Epoxy.
9
INSULATION RESISTANCE: 10 min.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant.
OPERATING TEMPERATURE: -30C to +65C
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
STORAGE TEMPERATURE: -30C to +85C
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I29 through I32. For additional options not shown in catalog, consult Customer Service Center.
Switch Function
S101 SPST, 6 AMPS
S202 (DPDT, 6 AMPS
Actuator
S802 DPDT, 15 AMPS
03 .335" high
S102 SPDT, 6AMPS
04 .500" high
S112 SPDT, mom., 6 AMPS
09 .250" high
Detent
S201 DPST, 6 AMPS
12 Screwdriver slot
S602 DPDT, 12 AMPS 1 With detent
(with marking)
S701 SPST, 15 AMPS 2 Without detent
13 Screwdriver slot
S702 SPDT, 15 AMPS
Mounting Style
(without marking)
SS Panel with mounting ears
C2 Black cap
MS PC thru-hole
C3 Red cap
S2 Snap-in panel with blacktop plate
C5 Yellow cap
TS Panel with mounting ears
Terminations
03 Solder lug with hole
Housing Markings
02 PC Thru-hole
NONE No markings
04 PC Thru-hole
D ON-OFF
07 Quick connect
L ON
08 PC Thru-hole
M ON-OFF
WC Wire lead
N Red rectangle on one end
Contact Material
Q Silver
B Gold Seal
G Gold over silver
NONE No seal
E Epoxy seal
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ck-components.com
I28
SlideSlide
S Series
Slide Switches
SWITCH FUNCTION
AVAILABLE AVAILABLE
NO. MODEL AMP SWITCH MOUNTING NO. MODEL AMP SWITCH MOUNTING
POLES NO. RATING FUNCTION SCHEMATIC STYLES POLES NO. RATING FUNCTION SCHEMATIC STYLES
S101 6 SPSTSS S201 6 DPST MS,SS,TS
6 SPDT MS,SS
S102
SP
S202 6 DPDT MS,SS, TS
6 SPDT-MOM. MS,SS DP
S112
S701 15 SPST S1,S2,S3,ST
S602 12 DPDT MS,SS, TS
I
S702 15 SPDT S1,S2,S3,ST
S802 15 DPDT S1,S2,S3,ST
SPST DPDT
Part number shown: S202031SS03Q
Part number shown: S101031SS03Q
NOTE: and MOM. in table indicates momentary action.
All models with all options when ordered with G or Q contact material.
Contacts make on side actuator thrown.
ACTUATOR
03 .335" HIGH 04 .500" HIGH 09 .250" HIGH 12 SCREWDRIVER SLOT 13 SCREWDRIVER SLOT
(WITH MARKING) (WITHOUT MARKING)
.062 .062
(1,57) (1,57)
NOTE: Standard actuator color is black, other colors available, consult Customer Service Center. Alternate heights
White 115-230 markings (std.). Without markings.
are available with 03, 04 and 09 actuators, consult Customer Service Center. Models with S2 mounting style,
subtract .090 (2, 29). Actuators 12 and 13 are available with DPST and DPDT models only.
C2; C3; C5 SNAP-ON CAP
NOTE: Actuator finish: matte.
OPTION C1-CT CAP
If no color is specified, black will be
CODE2 COLOR
supplied. Colored actuator caps may
also be ordered separately and user
C2 BLACK
installed, see page I-32.
C3 RED
C5 YELLOW
Available with S2 mounting
style only.
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
www.ck-components.com
I29