Slide
1000 Series
Miniature Slide Switches
Features/Benefits Typical Applications
Variety of actuators and terminations Test & measurement equipment
Panel mount tabs available Telecommunications
Epoxy terminal sealcompatible with Computer & peripherals
bottom-wash cleaning
RoHS compliant
Models Available
Specifications Materials
CONTACT RATING: B contact material: 0.4 VA max. @
CASE: diallyl phthalate (DAP), (UL 94V-0).
I
20 V AC or DC max. Q contact material: 6 AMPS @
ACTUATOR: Nylon, black, standard.
120 V AC or 28 V DC, 3 AMPS @ 250 V AC.
HOUSING: Stainless steel.
See page I-16 for additional ratings.
SWITCH SUPPORT: Brass or steel, matte-tin plated.
ELECTRICAL LIFE: 100,000 make-and-break cycles at full
END CONTACTS: B contact material: Copper alloy, with gold plate over
load on models with B, K or P contact material; 40,000 cycles
nickel plate. Q contact material: Coin silver, silver plated. See
on models with G, Q, L, M, S or R contact material.
page I-16 for additional contact materials.
CONTACT RESISTANCE: Below 10 m typ. initial @
CENTER CONTACT & ALL TERMINALS: B contact material: Copper
2-4 V DC, 100 mA, for both silver and gold plated contacts.
alloy, with gold plate over nickel plate. Q contact material: Copper
9
INSULATION RESISTANCE: 10 min.
alloy, silver plated. See page I-16 for additional contact materials.
DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level.
TERMINAL SEAL: Epoxy. Refer to Soldering and Cleaning in Technical
OPERATING TEMPERATURE: 30C to 65C
Data chapter
SOLDERABILITY: Per MIL-STD-202F method 208D, or
NOTE: Any models supplied with Q, B, G, P, S or R contact material are RoHS compliant.
EIA RS-186E method 9 (1 hour steam aging).
NOTE: Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages I12 through I16. For additional options not shown in catalog, consult Customer Service Center. All models
have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods.
Switch Function
1101 SP On-None-On
1103 SP On-Off-On
1108 SP Mom-None-On
1201 DP On-None-On
1203 DP On-Off-On
Mounting Style
M2 PC mount without tabs
M1 Panel mount with tabs
Actuator
S3 .200 high
S1 .040 high Terminations
S2 .140 high A Right angle, PC thru-hole
Contact Material
C PC Thru-hole
S4 .285 high
B Gold
S5 .370 high AV2 Vertical right angle, PC thru-hole
Q Silver
Z Solder lug
S6 .485 high
G Gold over silver Seal
T3 .200 high V3 V-bracket
P Gold, matte-tin E Epoxy
V4 V-bracket
S Silver, matte-tin D No epoxy seal
W .750 long, wire wrap
R Gold over silver, matte-tin I Epoxy potted base
Z3 Quick connect
Actuator Color
2 Black
1 White
3 Red
Dimensions are shown: Inches (mm)
Specifications and dimensions subject to change
19 dec 18
www.ckswitches.com
I111000 Series
Miniature Slide Switches
SWITCH FUNCTION
SWITCH FUNCTION CONNECTED TERMINALS
POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3
NO. MODEL
POLES NO. SCHEMATIC
1101 ON NONE ON N/A
SP 1-2 2-3
1103 ON OFF ON OPEN
1108 MOM. NONE ON N/A SPDT
SPDT
0.95
(2,41)
I
Part number shown: 1101M2S3CQE2
1201 ON NONE ON
DP 2-1,5-4 OPEN 2-3,5-6
DPDT
1203 ON OFF ON
DPDT
Actuator shown
in position 1
Terminal Nos.
Part number shown: 1201M2S3CQE2
For Reference Only
MOM. = Momentary
All models with all options when ordered with G, Q, S or R contact material.
MOUNTING STYLE
M2PC MOUNTING WITHOUT TABS M1PANEL MOUNTING WITH TABS
NOTE: Available with C, W, Z, Z3 terminations only.
NOTE: Available with A, AV2, C, V3, V4, W terminations only.
No mounting hardware supplied.
PANEL MOUNTING
.275
(6,99)
All actuators except T3. For T3 actuator only.
Single pole Double pole
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
19 dec 18
www.ckswitches.com
I12
Slide