HLMP-Cx08 Series, HLMP-Cx25 Series HLMP-Cx27 Series, HLMP-C610 3 T-1 / (5 mm) AlInGaP Lamps 4 Data Sheet Description Features The HLMP-Cx08, HLMP-Cx25, HLMP-Cx27, and HLMP-C610 High intensity series are 5 mm lamps specially designed for applications General purpose leads requir-ing very high on-axis intensity that is not achiev- Popular 5 mm diameter able with a standard lamp. These devices are capable of producing light output over a wide range of drive currents. Available in bulk, tape and reel, or ammopack 8 or 25 viewing angles Built using AlInGaP technology, they are well suited for typical 5 mm TS-AlGaAs lamp applications, and have sig- Choice of colors: Amber or Red nificantly SUPERIOR RELIABILITY than most TS-AlGaAs Applications lamps in wet/hot environments. These lamps come with clear non-diffused lens and are optically designed to yield Indoor/outdoor applications superior light output. Small store-front signs Message panels Road construction barrier lights Center high mount stop lights Spoiler, car decorative lighting Motorcycle/bicycle warning lights Device Selection Luminous Intensity, Typical Viewing Iv (mcd) 20 mA 1 Angle (degrees), Dominant 2 Part Number Standoff 2q Min. Typ. Color Wavelength 1/2 HLMP-C008-U00xx No 8 2900 6000 Red 626 HLMP-C208-S00xx 8 2600 3000 Amber 590 HLMP-C608-R00xx 8 1000 2000 Red 635 HLMP-C610-R00xx Yes 8 1000 2000 Red 635 HLMP-C025-P00xx No 25 500 1000 Red 626 HLMP-C225-O00xx 25 450 800 Amber 590 HLMP-C625-P00xx 25 500 700 Red 635 HLMP-C027-P00xx Yes 25 500 1000 Red 626 HLMP-C627-P00xx 25 500 700 Red 635 HLMP-C325-P00xx No 25 500 Orange 605 Notes: 1 1. q / is the off-axis angle at which the luminous intensity is half of the axial luminous intensity. 2 2. The dominant wavelength, l , is derived from the CIE chromaticity diagram and represents the single wavelength that defines the color of the d device.Package Dimensions HLMP-Cx27 1.07 (0.042) 0.56 (0.022) 6.10 (0.240) 1.00 (0.040) MAX. EPOXY MENISCUS 5.46 (0.215) 1.32 (0.052) 0.45 SQ. NOM. 1.02 (0.040) (0.018) 5.21 (0.205) 4.70 (0.185) 2.54 CATHODE NOM. 9.14 (0.360) (0.100) LEAD 8.38 (0.330) 1.27 13.50 (0.53) NOM. (0.050) 13.30 (0.52) 25.40 MIN. (1.000) HLMP-Cx25 1.07 (0.042) 0.56 (0.022) 6.10 (0.240) 1.00 (0.040) MAX. EPOXY MENISCUS 5.46 (0.215) 0.45 SQ. NOM. 0.65 (0.026) MAX. (0.018) 5.21 (0.205) 4.70 (0.185) 2.54 CATHODE NOM. 9.14 (0.360) (0.100) LEAD 8.38 (0.330) 1.27 NOM. (0.050) 25.40 MIN. (1.000) HLMP-C610 0.89 (0.035) 0.64 (0.025) 6.10 (0.240) 1.00 (0.040) MAX. EPOXY MENISCUS 5.46 (0.215) 0.45 1.32 (0.052) SQ. NOM. (0.018) 1.02 (0.040) 5.08 (0.200) 4.57 (0.180) 2.54 CATHODE NOM. 9.19 (0.362) (0.100) LEAD 8.43 (0.332) 1.27 NOM. 13.55 (0.533) (0.050) 13.35 (0.525) 25.40 MIN. (1.00) HLMP-Cx08 0.89 (0.035) 0.64 (0.025) 6.10 (0.240) 1.00 (0.040) MAX. EPOXY MENISCUS 5.46 (0.215) 0.45 SQ. NOM. 0.65 (0.026) MAX. (0.018) 5.08 (0.200) 4.57 (0.180) 2.54 CATHODE NOM. 9.19 (0.362) (0.100) LEAD 8.43 (0.332) 1.27 NOM. (0.050) 25.40 MIN. (1.00) Notes: 1. All dimension are in mm (inches). 2. For PCB hole recommendations, see the Precautions section. 2