Type 0ACH Fast Acting High Current Brick Fuse 0ACH Series RoHS Compliant Features - Fast acting high current brick fuse - Surface mount design to save space, 4.5x4.5x12.3mm physical size - Ceramic square body with end cap design - Wide operating temperature range, -40 to 125 - Tape & Reel for auto-insert SMD process - MSL=1 - Designed to UL248-1, 248-14 - RoHS compliant with exemption 7(a) Fully compliance with EU Directive 2011/65/EU and amending directive 2015/863 - AEC-Q Compliant - Meets Bel automotive qualification* * - Largely based on internal AEC-Q test plan Applications - High-Power Battery Systems - Routers - Blade Servers - Surface mount design to save space HALOGEN FREE = Physical Specifications Body : Ceramic AEC-Q Compliant Materials Cap : Silver plated copper On Fuse : Current Ratin Marking On Label : be,0ACH,Current Ratin,Voltage Ratin,Interrupting Ratin, and , (China RoHS compliant). Electrical Characteristics Safety Agency Approvals Ampere Rating / Operating Time Ampere Range / Volt % of Ampere Safety Agency Voltage Rating I.R. ability** Rating (A) Min Max 100% 4hours - 60A/80V DC* 60A/80V 1000A DC 60-100A/72V DC 60-100A/72V 1000A DC 350% - 10sec /63V DC /63V 1000A DC /32V DC /32V 1000A DC /125V AC /125V 500A AC *Internal qualification for 60A 80Vdc **AC Interrupting Rating (Measured at designated voltage, 100% power factor random closing) DC Interrupting Rating (Measured at designated voltage, time constant of less than 50 microseconds,battery source) Specifications subject to change without notice belfuse.com/circuit-protection 2 / 3 Type 0ACH Electrical Specifications Ampere Voltage and Interrupting Typical Cold. Resistance Typical Voltage Drop Typical Pre-Arcing It Part Number Rating Ratings (mohms) (mV) (ASec)* 0ACH-9600-XX 60A 0.60 75 900 See Table of Ratings on Page 1 for Voltage and 0ACH-9800-XX 80A 0.44 65 1700 associated Interrupting Ratings 0ACH-K100-XX 100A 0.29 55 5000 Consult manufacturer for other ratings * Typical Pre-arcing It are measured at 10In Current, DC battery bank, but not exceeding the interrupting rating, time constant of calibrated circuit less than 50 microseconds) Temperature Re-Rating Curve Average Time Current Curve Normal Operating Temperature: 25 2 Time Current Curve Operating Temperature: -40 to 125 with proper correction factor applied. Chart of correction factor 10000 1000 100 10 1 0.1 0.01 0.001 10 100 1000 CURRENT IN AMPERES Soldering Characteristics Reflow Soldering Temperature: 260 C Time: 30 Seconds Maximum Specifications subject to change without notice Bel Fuse Inc. +1 201.432.0463 206 Van Vorst Street Bel.US.CS belf.com Jersey City, NJ 07302 USA belfuse.com/circuit-protection 2021 Bel Fuse, Inc. Rev. 0ACH Jul2021 TIME IN SECONDS 60A 80A 100A